Dashboard
broncoracing·dashboard·pcb/PCB.kicad_pcb
About the Dashboard PCB
Dashboard is an open source STM32 PCB design by broncoracing, published on GitHub. It is a 4-layer board measuring 145 × 73 mm, with 278 components from 32 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3, ADP2303ARDZ-5.0, 74HCT541, SN65HVD230 and ESD224DQA. By type, the board carries 128 diodes, 102 capacitors, 20 resistors, 10 ICs, 10 jumpers and 3 inductors.
From the project
BR23 Dashboard PCB/Firmware
Upon pushing a commit, a Github action will automatically run electrical & design rule checks to verify the pcb design, then generate gerber/drill/BOM files and renderings/PDFs of the pcb and schematics.
Main components on the Dashboard
Dashboard bill of materials (BOM)
278 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 2 | ADP2303ARDZ-5.0 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2, U6 |
| 1 | 74HCT541 | SSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 4 | ESD224DQA | Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U17, U18, U19, U20 |
| 1 | 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | JST B24B-PADSS-F | JST_B24B_PADSS | J2 |
| 1 | JST B04B-XASK | JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | J4 |
| 1 | Fuse | Fuse_0603_1608Metric | F1 |
| 10 | Jumper_2_Bridged | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 +2 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | DD23 |
| 1 | SMBJ15CA | D_SMB | D1 |
| 3 | SSB43L | D_SMB | D2, D128, D129 |
| 31 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3, D4, D8, D9, D10, D11, D12, D13 +23 |
| 2 | LED | LED_0603_1608Metric | D5, D6 |
| 1 | D_TVS_Dual_AAC | SOT-323_SC-70 | D7 |
| 90 | WS2812B | XL-3528RGBW-WS2812B | D38, D39, D40, D41, D42, D43, D44, D45 +82 |
| 1 | 100R@100MHz | R_0805_2012Metric | FB1 |
| 2 | 4.7u | L_7.3x7.3_H3.5 | L1, L2 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 90 | 100n | C_0402_1005Metric | C1, C2, C3, C7, C8, C9, C10, C12 +82 |
| 3 | 1u | C_0603_1608Metric | C4, C5, C11 |
| 1 | 4u7 | C_0603_1608Metric | C6 |
| 4 | 30p | C_0402_1005Metric | C14, C15, C16, C19 |
| 2 | 10u | C_0805_2012Metric | C97, C100 |
| 2 | 47u | C_0805_2012Metric | C99, C102 |
| 2 | 100k | R_0402_1005Metric | R1, R2 |
| 2 | 1.5k | R_0603_1608Metric | R3, R4 |
| 2 | 60 | R_0805_2012Metric | R5, R6 |
| 2 | 47R | R_0805_2012Metric | R7, R8 |
| 4 | 10k | R_Array_Convex_4x0603 | RN13, RN16, RN19, RN22 |
| 8 | 1k | R_Array_Convex_4x0603 | RN14, RN15, RN17, RN18, RN20, RN21, RN23, RN24 |
Dashboard design files
The KiCad project lives in the broncoracing/dashboard repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/PCB.kicad_pcb
- Schematicpcb/PCB.kicad_sch
Dashboard: common questions
What microcontroller does the Dashboard use?
The Dashboard is built around the STM32F103C8T6, from the STM32 family.
How big is the Dashboard PCB?
The Dashboard measures 145 × 73 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Dashboard?
278 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dashboard design files?
From the broncoracing/dashboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dashboard design in my own project?
The repository has no license, so all rights stay with broncoracing. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Dashboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k