3 open source boards using the ESD224DQA
Real designs built with the ESD224DQA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Kaltstahl
machdyne
30 × 16 mm39 parts2LCustom license6STM32
Dashboard
broncoracing
145 × 73 mm278 parts4LNo license0STM32
Dashboard-BR26Dashboard
ctpurvis
145 × 73 mm278 parts4LNo license0
The ESD224DQA in open source designs
The gallery holds 3 open source boards using the ESD224DQA from 3 GitHub repositories; a typical one measures about 145 × 73 mm and carries around 278 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is Kaltstahl by machdyne.
Parts used alongside the ESD224DQA
Microcontrollers on boards using the ESD224DQA
ESD224DQA: common questions
Where can I find a ESD224DQA reference design?
Each of the 3 boards on this page is a real design using the ESD224DQA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESD224DQA?
The 74HCT541, ADP2303ARDZ-5.0, AMS1117-3.3, SN65HVD230 and STM32F103C8T6 appear in the most repositories here.
Which microcontrollers do boards using the ESD224DQA use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the ESD224DQA?
The median is 145 × 73 mm, and 33% are two-layer designs.
What is the most popular open source board using the ESD224DQA?
By GitHub stars, Kaltstahl by machdyne, with 6 stars.
Can I simulate one of these boards using the ESD224DQA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.