PVDX BatteryBoard
BrownSpaceEngineering·PVDX-Battery-Board
About the PVDX BatteryBoard PCB
PVDX BatteryBoard is an open source PCB design by BrownSpaceEngineering, published on GitHub. It is a 2-layer board measuring 75.7 × 115 mm, with 44 components from 14 distinct parts.
By type, the board carries 12 connectors, 10 resistors, 4 diodes, 4 capacitors and 2 transistors.
It belongs with the power & battery designs in this gallery.
From the project
Battery subsystem board for PVDX — connects the battery stack, solar cells/solar PCB, heaters, and thermistors.
Battery subsystem board for PVDX — connects the battery stack, solar cells/solar PCB, heaters, and thermistors.
The Battery Board is primarily structural/routing rather than active. It has no onboard charging or regulation ICs (that logic lives on EPS). Its job is to tie the battery stack into the rest of the power subsystem: routing to the regular (non-perovskite) solar cells and solar PCB, driving the battery heaters, and carrying thermistor signals back for battery temperature monitoring.
PVDX BatteryBoard bill of materials (BOM)
44 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DMC2053UVT | TSOT-23-6 | Q1, Q2 |
| 1 | Conn_01x19 | PinHeader_1x19_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06 | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | PinSocket_1x10_P2.54mm_Vertical | J3 |
| 4 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J4, J6, J8, J10 |
| 4 | Conn_01x01_Pin | PinSocket_1x01_P2.54mm_Vertical | J5, J7, J9, J11 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 4 | 15.8k | R_0603_1608Metric | Rt1, Rt3, Rt5, Rt7 |
| 4 | 5.83k | R_0603_1608Metric | Rt2, Rt4, Rt6, Rt8 |
| 4 | GA10K3A1IA | PinHeader_1x02_P2.54mm_Vertical | TH1, TH2, TH3, TH4 |
| 4 | RSX301LAM30TR D_Schottky | D_SOD-128 | D1, D2, D3, D4 |
| 4 | .1u | C_0603_1608Metric | C1, C2, C3, C4 |
| 6 | 10k | R_0603_1608Metric | R1, R2, R4, R6, R7, R10 |
| 4 | Heater | PinHeader_1x02_P2.54mm_Vertical | R3, R5, R8, R9 |
PVDX BatteryBoard design files
The KiCad project lives in the BrownSpaceEngineering/PVDX-Battery-Board repository on GitHub; these links point at the commit this page was built from.
PVDX BatteryBoard: common questions
How big is the PVDX BatteryBoard PCB?
The PVDX BatteryBoard measures 75.7 × 115 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PVDX BatteryBoard?
44 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the PVDX BatteryBoard design files?
From the BrownSpaceEngineering/PVDX-Battery-Board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PVDX BatteryBoard design in my own project?
The repository has no license, so all rights stay with BrownSpaceEngineering. Use it as a reference, and ask the author before reusing the design.
More boards in PVDX-Battery-Board
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k