Sipm testbench
brunogle·sipm-testbench·board/sipm-redpitaya-shield.kicad_pcb
About the Sipm testbench PCB
Sipm testbench is an open source PCB design by brunogle, published on GitHub. It is a 4-layer board measuring 95 × 60 mm, with 110 components from 53 distinct parts.
Other key parts include the TPS79325, LM2776, TPS72325, DAC8562SDG and OPA392DBV. By type, the board carries 42 capacitors, 41 resistors, 8 ICs, 6 connectors, 5 diodes and 2 transistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
SiPM Testbench for Red Pitaya
Main components on the Sipm testbench
Sipm testbench bill of materials (BOM)
110 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS79325 | SOT-23-5 | U1 |
| 1 | LM2776 | SOT-23-6 | U2 |
| 1 | TPS72325 | SOT-23-5 | U3 |
| 1 | DAC8562SDG | VSSOP-10_3x3mm_P0.5mm | U4 |
| 1 | OPA392DBV | SOT-23-5 | U5 |
| 1 | LT3482 | QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm | U6 |
| 1 | OPA858IDSGR | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U7 |
| 1 | ADS1247 | TSSOP-20_4.4x6.5mm_P0.65mm | U8 |
| 1 | Fan | PinHeader_1x02_P2.54mm_Vertical | M1 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 1 | SiPM V+ | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J1 |
| 2 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J2, J3 |
| 1 | SiPM In | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J4 |
| 1 | Conn_01x03_Pin | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J5 |
| 1 | SiPM Out | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J6 |
| 2 | Conn_02x13_Odd_Even | PinSocket_2x13_P2.54mm_Vertical | E0, E1 |
| 1 | COTO 9091-05-10 | Relay_SPST_COTO_9091 | K1 |
| 1 | G6K-2F | Relay_DPDT_Omron_G6K-2F | K2 |
| 1 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 2 | GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D4 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BAS316 | D_SOD-323 | D3, D5 |
| 1 | APH0420T100M | L_APV_APH0420 | L1 |
| 3 | 2.2uF | C_0603_1608Metric | C1, C6, C9 |
| 13 | 100nF | C_0603_1608Metric | C2, C3, C15, C16, C27, C28, C30, C31 +5 |
| 11 | 1uF | C_0603_1608Metric | C4, C10, C11, C12, C13, C14, C17, C18 +3 |
| 3 | 10nF | C_0603_1608Metric | C5, C8, C42 |
| 1 | 10uF | C_0603_1608Metric | C7 |
| 1 | 100nF 50V | C_0603_1608Metric | C19 |
| 2 | 470nF 100V | C_1206_3216Metric | C21, C22 |
| 2 | 1nF | C_0603_1608Metric | C23, C26 |
| 1 | 100pF 100V | C_0603_1608Metric | C24 |
| 2 | 100nF 100V | C_0805_2012Metric | C25, C33 |
| 1 | YFF31AH2A104MT0Y0N | YFF31HC | C29 |
| 1 | 10pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C34 |
| 1 | 100pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C37 |
| 6 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R15, R24, R41 |
| 1 | 1M 1% | R_0603_1608Metric | R2 |
| 3 | 1.8k | R_0603_1608Metric | R5, R10, R27 |
| 2 | 1k | R_0603_1608Metric | R6, R26 |
| 1 | 15k | R_0603_1608Metric | R7 |
| 4 | 10k | R_0603_1608Metric | R8, R12, R18, R21 |
| 1 | 22k 1% | R_0603_1608Metric | R9 |
| 1 | 1M | R_0603_1608Metric | R11 |
| 4 | 50 | R_0603_1608Metric | R13, R19, R22, R23 |
| 1 | 4.7k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | 10 | R_0603_1608Metric | R16 |
| 2 | 10 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17, R20 |
| 1 | 10M 1% | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 2 | 1k | R_0402_1005Metric | R28, R34 |
| 7 | 50 | R_0402_1005Metric | R29, R30, R31, R32, R36, R38, R39 |
| 2 | 100k | R_0402_1005Metric | R33, R37 |
| 1 | 100k 1% | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 1 | 4.7k | R_0603_1608Metric | R42 |
Sipm testbench design files
The KiCad project lives in the brunogle/sipm-testbench repository on GitHub; these links point at the commit this page was built from.
Sipm testbench: common questions
How big is the Sipm testbench PCB?
The Sipm testbench measures 95 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Sipm testbench?
110 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sipm testbench design files?
From the brunogle/sipm-testbench repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sipm testbench design in my own project?
The repository has no license, so all rights stay with brunogle. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979