Drboogie
About the Drboogie PCB
Drboogie is an open source PCB design by bubbajfett, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 58.5 × 57 mm, with 59 components from 36 distinct parts.
By type, the board carries 23 capacitors, 20 resistors, 5 transistors and 1 connector.
It belongs with the audio designs in this gallery.
From the project
collection of guitar pedal PCB layouts in kicad
This is based on the Mesa Boogie Dual Rectifier Solo Amplifier. It is a high-gain overdrive pedal. I think it is designed by ElectraTabs over on the DIYStompboxes forum.
This is the 2nd version of the board. The original version worked too, but the pots were wrong footprint, so they increased anti-clockwise. The build was done with MMBFJ201 JFETs. This has dual footprints for the JFETs. These were soldered in first, and tested using pins in the through-hole part of the footprint. The main deviation on my build is an A25K footprint in the smaller RK09 potentiometers is apparently…
Drboogie bill of materials (BOM)
59 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | j201 | TO92-SMD | Q1, Q2, Q3, Q4, Q5 |
| 1 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 4 | 100K | Potentiometer_Runtron_RM-065_Vertical | RV1, RV3, RV4, RV5 |
| 1 | A1M | Potentiometer_Alps_RK09L_Single_Vertical | RV2 |
| 2 | A100K | Potentiometer_Alps_RK09L_Single_Vertical | RV6, RV9 |
| 1 | B10K | Potentiometer_Alps_RK09L_Single_Vertical | RV7 |
| 1 | A25K | Potentiometer_Alps_RK09L_Single_Vertical | RV8 |
| 1 | B5K | Potentiometer_Alps_RK09L_Single_Vertical | RV10 |
| 3 | 100u | CP_Radial_D6.3mm_P2.50mm | C1, C2, C3 |
| 1 | 4n7 | C_Rect_L7.0mm_W3.5mm_P5.00mm | C4 |
| 1 | 100n | C_Rect_L7.0mm_W3.5mm_P5.00mm | C5 |
| 1 | 220p | C_Rect_L7.0mm_W3.5mm_P5.00mm | C6 |
| 3 | 1u | C_Rect_L7.0mm_W4.5mm_P5.00mm | C7, C14, C18 |
| 3 | 22n | C_Rect_L7.0mm_W3.5mm_P5.00mm | C8, C13, C16 |
| 1 | 1n | C_Rect_L7.0mm_W3.5mm_P5.00mm | C9 |
| 1 | 2n2 | C_Rect_L7.0mm_W3.5mm_P5.00mm | C10 |
| 1 | 20p | C_Rect_L7.0mm_W2.0mm_P5.00mm | C11 |
| 2 | 220p | C_Rect_L7.0mm_W2.0mm_P5.00mm | C12, C17 |
| 1 | 1n | C_Rect_L7.0mm_W4.5mm_P5.00mm | C15 |
| 2 | 15n | C_Rect_L7.0mm_W3.5mm_P5.00mm | C19, C20 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 6n8 | C_Rect_L7.0mm_W3.5mm_P5.00mm | C21 |
| 2 | 220n | C_Rect_L7.0mm_W3.5mm_P5.00mm | C22, C23 |
| 2 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 2M2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R7 |
| 2 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R12 |
| 1 | 68K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 3 | 1K8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R10, R16 |
| 1 | 680K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 2 | 470K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R11 |
| 1 | 3K9 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | 330K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14 |
| 1 | 220K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 1 | 2K2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
| 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R19 |
| 1 | 5K1 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20 |
Drboogie design files
The KiCad project lives in the bubbajfett/kicad-guitar-pedals repository on GitHub; these links point at the commit this page was built from.
Drboogie: common questions
How big is the Drboogie PCB?
The Drboogie measures 58.5 × 57 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Drboogie?
59 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Drboogie design files?
From the bubbajfett/kicad-guitar-pedals repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Drboogie design in my own project?
Yes, under the terms of its CC0-1.0 license, which bubbajfett chose for the repository.
More boards in kicad-guitar-pedals
Revv g4
58 × 57.6 mm71 parts2LCC0-1.014
Triple wreck
59.7 × 62 mm67 parts2LCC0-1.014
Tweed57
54.9 × 58.7 mm53 parts2LCC0-1.014
Sftii
55.1 × 51.6 mm53 parts2LCC0-1.014
Bmp2
58 × 46.4 mm52 parts2LCC0-1.014
Deep blue delay
54.9 × 57.7 mm49 parts2LCC0-1.014
Eq
59 × 56.6 mm48 parts2LCC0-1.014
Tonemachine
58 × 42.1 mm47 parts2LCC0-1.014
Fatdrive
59.1 × 46.9 mm46 parts2LCC0-1.014
Umble
58.1 × 50.3 mm44 parts2LCC0-1.014
Ecstacy
59.3 × 36.8 mm41 parts2LCC0-1.014
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687