Cdipannoucer
buelowp·cdipannoucer·eda/loconet.kicad_pcb
About the Cdipannoucer PCB
Cdipannoucer is an open source PCB design by buelowp, published on GitHub under the MIT license. It is a 2-layer board measuring 105.7 × 60.2 mm, with 53 components from 25 distinct parts.
Other key parts include the LM311, L78M05ABDT-TR and 6N139. By type, the board carries 26 resistors, 16 diodes, 6 ICs, 3 capacitors and 1 transistor.
It belongs with the iot & wireless designs in this gallery.
From the project
Provides LocoNet feedback for Cobalt Digital IP turnout state
So, basically, I chose this as a low impact HW/SW project I could do to solve the problem. I'm learning how to do HW as a long term software engineer by trade, and enjoy doing small projects with MCU's. This may not be very useful to very many people, but it's fun and I'm looking forward to using it on my layout which has about 30 turnouts in a 19'x19' snaking layout.

Main components on the Cdipannoucer
Cdipannoucer bill of materials (BOM)
53 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM311 | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | L78M05ABDT-TR STMicroelectronics | TO-252-2_L6.5-W6.1-P4.58-LS10.0-TL | U3 |
| 4 | 6N139 | SOP-8_6.605x9.655mm_P2.54mm | U4, U5, U6, U7 |
| 1 | MMBT3904 hongjiacheng | Q_SOT-23 | Q2 |
| 1 | DB107S MDD(Microdiode Electronics) | DBS_L8.2-W6.4-P5.10-LS10.0-BL | DB1 |
| 1 | RB160M-30 hongjiacheng | D_SOD-123 | D1 |
| 4 | SS14 MDD(Microdiode Electronics) | D_SMA | D2, D5, D8, D13 |
| 5 | Green Everlight Elec | D_0603 | D3, D4, D6, D9, D12 |
| 1 | Blue Everlight Elec | D_0603 | D7 |
| 4 | Red Hubei KENTO Elec | D_0603 | D10, D11, D14, D17 |
| 1 | Yellow Everlight Elec | D_0603 | D16 |
| 1 | 330nF FH(Guangdong Fenghua Advanced Tech) | C_0603 | C1 |
| 1 | 100nF YAGEO | C_0603 | C2 |
| 1 | 100uf | CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 91kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R1 |
| 1 | 30kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R2 |
| 1 | 330kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R3 |
| 1 | 27kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R4 |
| 1 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R5 |
| 1 | 12kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R6 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R7, R8 |
| 4 | 510Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R9, R11, R12, R13 |
| 4 | 4.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R10, R14, R15, R16 |
| 6 | 2kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R18, R22, R23, R25, R26, R27 |
| 4 | 2kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R19, R20, R21, R24 |
Cdipannoucer design files
The KiCad project lives in the buelowp/cdipannoucer repository on GitHub; these links point at the commit this page was built from.
- Layouteda/loconet.kicad_pcb
- Schematiceda/loconet.kicad_sch
Cdipannoucer: common questions
How big is the Cdipannoucer PCB?
The Cdipannoucer measures 105.7 × 60.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cdipannoucer?
53 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cdipannoucer design files?
From the buelowp/cdipannoucer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cdipannoucer design in my own project?
Yes, under the terms of its MIT license, which buelowp chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547