Amp-Cabinet
BURNTcookiekoki·Amp-Cabinet·CAD/PCB/Guitar amp Cab.kicad_sch
About the Amp-Cabinet PCB
Amp-Cabinet is an open source PCB design by BURNTcookiekoki, published on GitHub. It is a board, with 16 components from 12 distinct parts.
Other key parts include the A100K Pot. By type, the board carries 2 capacitors, 1 module, 1 connector, 1 switch and 1 diode.
It belongs with the audio designs in this gallery.
From the project
A amp cabinet that most amps can connect to make bigger sound
This amp Cabinet features 2 50w 8Ω speaker controlled by a A10K pot and only needs a 24v 6a power supply.
I created this project because from my current amp I can not play in venues so I wanted a cheaper alternative which will be able to play in small venues. this project uses a 24v by 6a power supply to power the speakers, and later on this project will get a guitar amp head when I make this on forge. This project will require cutting wood boards and 3d printing as well as soldering.
Main components on the Amp-Cabinet
Amp-Cabinet bill of materials (BOM)
16 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A100K Pot | Potentiometer_ACP_CA6-VSMD_Vertical | A100K1 |
| 1 | Jack-DC | BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J1 |
| 1 | Mono 6.35mm | Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | 1/4"Input1 |
| 1 | Breadboard | TO-18-2_Lens | B1 |
| 1 | 24v to 12v | TO-220-3_Vertical | Converter1 |
| 1 | Pre Amp | SOT-23-5 | KC5166Pre-ChampPreamplifier1 |
| 5 | MDF | MDF1, MDF2, MDF3, MDF4, MDF5 | |
| 1 | TPA3116D2DAD | Texas_DAD0032A_HTSSOP-32_6.1x11mm_P0.65mm_TopEP3.71x3.81mm | Preamp1 |
| 1 | SW_Nidec_CAS-120A1 | Nidec_Copal_CAS-120A | SW1 |
| 1 | LED | Nidec_Copal_CAS-120A | D1 |
| 1 | 470uF | SOIC-8_3.9x4.9mm_P1.27mm | C1 |
| 1 | 100uF | SOIC-8_3.9x4.9mm_P1.27mm | C2 |
Amp-Cabinet design files
The KiCad project lives in the BURNTcookiekoki/Amp-Cabinet repository on GitHub; these links point at the commit this page was built from.
- SchematicCAD/PCB/Guitar amp Cab.kicad_sch
- NetlistCAD/PCB/Guitar amp Cab.net
- BOMREADME.md
Amp-Cabinet: common questions
How many components are on the Amp-Cabinet?
16 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Amp-Cabinet design files?
From the BURNTcookiekoki/Amp-Cabinet repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.
Can I use the Amp-Cabinet design in my own project?
The repository has no license, so all rights stay with BURNTcookiekoki. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687