HardLabs

UA AIAA Payload 2026

buttonbugs·UA-AIAA-Payload-2026·PCB_v1/Payload_2026_PCB_v1.kicad_pcb

UA AIAA Payload 2026 PCB layout, top view — open source AVR/Arduino board by buttonbugs

About the UA AIAA Payload 2026 PCB

UA AIAA Payload 2026 is an open source AVR/Arduino PCB design by buttonbugs, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 12 components from 11 distinct parts.

Its main chip is the Arduino_Nano_Every, from the AVR/Arduino family. By type, the board carries 11 connectors and 1 module.

It belongs with the sensors designs in this gallery.

From the project

This repository includes the payload codes for the UA AIAA Rocket Competition Team.

This repository includes the payload codes for the UA AIAA Rocket Competition Team.

Reference: Arduino Nano Every Full Pinout Diagram (Official)

Arduino footprints and symbols: Alarm-Siren/arduino-kicad-library

See https://jlcpcb.com/help/article/how-to-generate-gerber-and-drill-files-in-kicad-9

Main components on the UA AIAA Payload 2026

Arduino_Nano_Every

UA AIAA Payload 2026 bill of materials (BOM)

12 components, 11 distinct parts.

QtyPartRefs
1
Arduino_Nano_Every
A1
1
SD Card Reader
J1
1
Ozone Sensor
J2
1
SGP40 VOC Sensor
J3
1
IMU
J4
1
BME/BMP280
J5
1
Ultrasonic 1
J6
1
Ultrasonic 2
J7
1
Ultrasonic 3
J8
1
Battery
J9
2
SW-18020P
J10, J11

UA AIAA Payload 2026 design files

The KiCad project lives in the buttonbugs/UA-AIAA-Payload-2026 repository on GitHub; these links point at the commit this page was built from.

UA AIAA Payload 2026: common questions

What microcontroller does the UA AIAA Payload 2026 use?

The UA AIAA Payload 2026 is built around the Arduino_Nano_Every, from the AVR/Arduino family.

How big is the UA AIAA Payload 2026 PCB?

The UA AIAA Payload 2026 measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the UA AIAA Payload 2026?

12 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the UA AIAA Payload 2026 design files?

From the buttonbugs/UA-AIAA-Payload-2026 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the UA AIAA Payload 2026 design in my own project?

The repository has no license, so all rights stay with buttonbugs. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the UA AIAA Payload 2026 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in UA-AIAA-Payload-2026

Similar boards