HardLabs

Bilals-Pad v2

Bxald·Bilals-Pad-v2·PCB/Bilal's Pad.kicad_pcb

Bilals-Pad v2 PCB layout, top view — open source RP2040/RP2350 board by Bxald

About the Bilals-Pad v2 PCB

Bilals-Pad v2 is an open source RP2040/RP2350 PCB design by Bxald, published on GitHub. It is a 2-layer board measuring 62.2 × 73.7 mm, with 8 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 7 switches and 1 IC.

From the project

My first ever engineering project containing a hackpad with 6 keys, a rotary knob and custom-made 3d case for it.

Main components on the Bilals-Pad v2

XIAO-RP2040-DIP

Bilals-Pad v2 bill of materials (BOM)

8 components, 3 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
1
RotaryEncoder_Switch
SW7

Bilals-Pad v2 design files

The KiCad project lives in the Bxald/Bilals-Pad-v2 repository on GitHub; these links point at the commit this page was built from.

Bilals-Pad v2: common questions

What microcontroller does the Bilals-Pad v2 use?

The Bilals-Pad v2 is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Bilals-Pad v2 PCB?

The Bilals-Pad v2 measures 62.2 × 73.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bilals-Pad v2?

8 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Bilals-Pad v2 design files?

From the Bxald/Bilals-Pad-v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Bilals-Pad v2 design in my own project?

The repository has no license, so all rights stay with Bxald. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Bilals-Pad v2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards