Tas5805m
bybzmt·practise·mcu/digital-amplifier/tas5805m_pbtl/tas5805m.kicad_pcb
About the Tas5805m PCB
Tas5805m is an open source STM32 PCB design by bybzmt, published on GitHub. It is a 2-layer board measuring 90 × 90 mm, with 104 components from 52 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the TPS54202H, AMS1117-3.3, tas5805m, DLT11H0 and dir9001. By type, the board carries 56 capacitors, 22 resistors, 10 ICs, 9 connectors, 5 inductors and 1 crystal.
Main components on the Tas5805m
Tas5805m bill of materials (BOM)
104 components, 52 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54202H | SOT-23-6 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U3 |
| 2 | tas5805m | HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm | U4, U5 |
| 1 | DLT11H0 | spdif-DLT11H0 | U6 |
| 1 | dir9001 | TSSOP-28_4.4x9.7mm_P0.65mm | U7 |
| 1 | PCM2707C | TQFP-32_7x7mm_P0.8mm | U8 |
| 1 | LP5907 | SOT-23-5 | U9 |
| 1 | SN74CB3Q3257 | TSSOP-16_4.4x5mm_P0.65mm | U10 |
| 1 | Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | i2c | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | mute | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J5 |
| 1 | swd | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | encoder | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | i2s1 | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | i2s_bt | PinHeader_1x05_P2.54mm_Vertical | J9 |
| 1 | USB_C_Receptacle | usb_c_24p_smd | J10 |
| 1 | usb_in | PinSocket_1x04_P2.54mm_Vertical | J11 |
| 1 | LED | LED_0805_2012Metric | D1 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10uh | L_7.3x7.3_H4.5 | L1, L2, L3, L4 |
| 1 | 15uh | L_7.3x7.3_H4.5 | L5 |
| 3 | 680nf/25v | C_0805_2012Metric | C1, C3, C4 |
| 1 | 680uf/25v | C_0805_2012Metric | C2 |
| 1 | 2200uf 35v | CP_Radial_D16.0mm_P7.50mm | C5 |
| 8 | 22uf/25v | C_0805_2012Metric | C6, C9, C10, C12, C23, C27, C37, C41 |
| 7 | 100nf/50v | C_0805_2012Metric | C7, C18, C28, C29, C32, C42, C43 |
| 1 | 0.1uf | C_0805_2012Metric | C8 |
| 1 | 75pf | C_0805_2012Metric | C11 |
| 12 | 100nf | C_0805_2012Metric | C13, C14, C15, C16, C21, C22, C35, C45 +4 |
| 2 | 10uf/25v | C_0805_2012Metric | C17, C31 |
| 4 | 1uf/25v | C_0805_2012Metric | C19, C20, C33, C34 |
| 8 | 220nf/25v | C_0603_1608Metric | C24, C25, C26, C30, C38, C39, C40, C44 |
| 2 | 10pf | C_0805_2012Metric | C36, C53 |
| 3 | 10uf | C_0805_2012Metric | C46, C48, C55 |
| 1 | 4.7nf | C_0805_2012Metric | C49 |
| 1 | 68nf | C_0805_2012Metric | C51 |
| 1 | 1uf | C_0805_2012Metric | C56 |
| 1 | 510k | R_0805_2012Metric | R1 |
| 1 | 49.9k | R_0805_2012Metric | R2 |
| 1 | 100k | R_0805_2012Metric | R3 |
| 1 | 13.3k | R_0805_2012Metric | R4 |
| 8 | 9.53k | R_0805_2012Metric | R5, R6, R7, R9, R11, R12, R13, R14 |
| 1 | 4.7k | R_0805_2012Metric | R8 |
| 1 | 15k | R_0805_2012Metric | R10 |
| 1 | 680 | R_0805_2012Metric | R15 |
| 1 | 5.1K | R_0805_2012Metric | R16 |
| 2 | 1m | R_0805_2012Metric | R17, R18 |
| 1 | 1.5k | R_0805_2012Metric | R19 |
| 1 | 105k | R_0805_2012Metric | R20 |
| 1 | 1k | R_0805_2012Metric | R21 |
| 1 | 2k | R_0805_2012Metric | R22 |
Tas5805m design files
The KiCad project lives in the bybzmt/practise repository on GitHub; these links point at the commit this page was built from.
Tas5805m: common questions
What microcontroller does the Tas5805m use?
The Tas5805m is built around the STM32F103C8Tx, from the STM32 family.
How big is the Tas5805m PCB?
The Tas5805m measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tas5805m?
104 components, from 52 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tas5805m design files?
From the bybzmt/practise repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Tas5805m design in my own project?
The repository has no license, so all rights stay with bybzmt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tas5805m without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in practise
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k