10 open source boards using the LP5907
Real designs built with the LP5907, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
FreeEEG32-alpha1.5
neuroidss
70 × 70 mm192 parts4LAGPL-3.024Raspberry bioamplifier
martijnschouten
28.6 × 48.9 mm91 parts2LGPL-3.04ESP8266
Nestbox v2
Octanis3
85 × 60 mm113 parts2LMIT2STM32
Maru x21
donghee
51 × 31.5 mm181 parts4LNo license0STM32
Usb
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
Tas5805m
bybzmt
90 × 90 mm104 parts2LNo license0STM32
Usb1
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024AVR/Arduino
BivalveBit RevA
millerlp
102.7 × 17.8 mm48 parts2LGPL-3.00STM32
Usb2
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
Usb3
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024
How designs wire the LP5907
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LP5907 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is tied to 5V on 6 of 6 designs.
- Pin 4 is left unconnected on 6 of 6 designs.
- Pin 5 has a capacitor to GND on 5 of 6 designs, most often 1 µF (then 10 µF).
- Pin 2 is tied to GND on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 5V 100% |
|
| Pin 2 | Connected to: GND 83% · a signal 17% | — |
| Pin 3 | Connected to: AVDD_1_IN 67% · a signal 33% | — |
| Pin 4 | Connected to: Not connected 100% | — |
| Pin 5 | Connected to: VDDA 50% · a signal 50% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeEEG32-alpha1.5 by neuroidss, Raspberry bioamplifier by martijnschouten, Nestbox v2 by Octanis3 and Tas5805m by bybzmt.
The LP5907 in open source designs
The gallery holds 10 open source boards using the LP5907 from 6 GitHub repositories; a typical one measures about 94.5 × 80 mm and carries around 183 components.
80% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is FreeEEG32-alpha1.5 by neuroidss.
Microcontrollers on boards using the LP5907
What boards using the LP5907 are built for
LP5907: common questions
Where can I find a LP5907 reference design?
Each of the 10 boards on this page is a real design using the LP5907. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LP5907 pin 1 connected?
Pin 1 is tied to 5V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LP5907.
How is the LP5907 pin 4 connected?
Pin 4 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LP5907.
How is the LP5907 pin 5 connected?
Pin 5 has a capacitor to GND on 5 of 6 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the LP5907.
Which microcontrollers do boards using the LP5907 use?
Most are built on STM32 (7), AVR/Arduino (1) and ESP8266 (1).
How big is a typical board using the LP5907?
The median is 94.5 × 80 mm, and 80% are two-layer designs.
What is the most popular open source board using the LP5907?
By GitHub stars, FreeEEG32-alpha1.5 by neuroidss, with 24 stars.
Can I simulate one of these boards using the LP5907 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.