6 open source boards using the DIR9001

Real designs built with the DIR9001, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the DIR9001

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the DIR9001 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The FILT pin has a series resistor on 6 of 6 designs, most often 680 Ω.
  • The FILT pin has a capacitor to GND on 6 of 6 designs, most often 4.7 nF.
  • The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 10 µF (then 100 nF).
FSOUT0pin 2Connected to: Not connected 100%
FSOUT1pin 3Connected to: Not connected 100%
SCKOpin 4Connected to: Not connected 83% · a signal 17%
VDDpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5), 10 µF (2), 1 µF (1)
DGNDpin 6Connected to: GND 100%
XTOpin 7Connected to: Not connected 100%
XTIpin 8Connected to: GND 100%
CLKSTpin 9Connected to: Not connected 100%
PSCK0pin 13Connected to: Signal 50% · not connected 17% · GND 17% · 3.3V 17%
  • Resistor to GND on 33% · 10 kΩ (2)
PSCK1pin 14Connected to: Signal 50% · not connected 17% · GND 33%
  • Resistor to GND on 33% · 10 kΩ (2)
COUTpin 15Connected to: Not connected 100%
UOUTpin 16Connected to: Not connected 100%
EMPHpin 17Connected to: Not connected 83% · a signal 17%
BFRAMEpin 18Connected to: Not connected 100%
RSVpin 19Connected to: GND 100%
FILTpin 22Connected to: Signal 100%
  • Series resistor on 100% · 680 Ω (6)
  • Capacitor to GND on 100% · 4.7 nF (8)
AGNDpin 23Connected to: GND 100%
VCCpin 24Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 10 µF (5), 100 nF (4)
FMT0pin 25Connected to: Signal 50% · GND 17% · 3.3V 33%
  • Resistor to GND on 33% · 10 kΩ (2)
  • Capacitor to GND on 33% · 100 nF (2), 10 µF (1)
FMT1pin 26Connected to: 3.3V 50% · a signal 50%
  • Capacitor to GND on 50% · 100 nF (3), 10 µF (2)
  • Resistor to GND on 33% · 10 kΩ (2)
CKSELpin 28Connected to: GND 67% · not connected 33%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Asynchronous-SPDIF-Mixer by DADDesign-Projects, Dac by sambazley, AsD Preamp Digital Preamplifier by djupdal and Tas5805m by bybzmt.

The DIR9001 in open source designs

The gallery holds 6 open source boards using the DIR9001 from 6 GitHub repositories; a typical one measures about 100 × 84 mm and carries around 136 components.

67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Asynchronous-SPDIF-Mixer by DADDesign-Projects.

Microcontrollers on boards using the DIR9001

What boards using the DIR9001 are built for

DIR9001: common questions

Where can I find a DIR9001 reference design?

Each of the 6 boards on this page is a real design using the DIR9001. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the DIR9001 VDD pin?

The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the DIR9001.

What resistor goes on the DIR9001 FILT pin?

The FILT pin has a series resistor on 6 of 6 designs, most often 680 Ω. Counted from the KiCad layouts of 6 open source designs using the DIR9001.

What decoupling capacitors do designs use on the DIR9001 VCC pin?

The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the DIR9001.

What parts are used alongside the DIR9001?

The AMS1117-3.3, 74HC04, LM4562, MAX3490 and STM32H743VIT6 appear in the most repositories here.

Which microcontrollers do boards using the DIR9001 use?

Most are built on STM32 (4), ESP32 (1) and FPGA (1).

How big is a typical board using the DIR9001?

The median is 100 × 84 mm, and 67% are two-layer designs.

What is the most popular open source board using the DIR9001?

By GitHub stars, Asynchronous-SPDIF-Mixer by DADDesign-Projects, with 12 stars.

Can I simulate one of these boards using the DIR9001 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part