ESC
CalebJM04·ESC·ESC/ESC.kicad_pcb
About the ESC PCB
ESC is an open source PCB design by CalebJM04, published on GitHub. It is a 2-layer board measuring 41.6 × 42 mm, with 57 components from 12 distinct parts.
Other key parts include the MCF8315DVPWPR and LD1117S33TR_SOT223. By type, the board carries 30 capacitors, 20 resistors, 5 ICs and 2 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
Drone ESC
Main components on the ESC
ESC bill of materials (BOM)
57 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MCF8315DVPWPR | SOP65P640X120-25N | IC1, IC2, IC3, IC4 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Socket | JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal | J5 |
| 5 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6, C14, C21, C28 |
| 5 | 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C9, C15, C22, C29 |
| 4 | 47nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C13, C20, C27 |
| 8 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C7, C11, C16, C18, C23, C25, C30 |
| 4 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C12, C19, C26 |
| 4 | 2.2uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C10, C17, C24 |
| 16 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R7, R8, R9, R10 +8 |
| 4 | 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R11, R16 |
ESC design files
The KiCad project lives in the CalebJM04/ESC repository on GitHub; these links point at the commit this page was built from.
- LayoutESC/ESC.kicad_pcb
- SchematicESC/ESC.kicad_sch
ESC: common questions
How big is the ESC PCB?
The ESC measures 41.6 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESC?
57 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESC design files?
From the CalebJM04/ESC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESC design in my own project?
The repository has no license, so all rights stay with CalebJM04. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979