Keyboard

CalebJM04·Keyboard-PCB·modern-keyboard-template/modern-keyboard-template.kicad_pcb

Keyboard PCB layout, top view — open source STM32 board by CalebJM04

About the Keyboard PCB

Keyboard is an open source STM32 PCB design by CalebJM04, published on GitHub. It is a 2-layer board measuring 44 × 44.1 mm, with 193 components from 15 distinct parts.

Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the PRTR5V0U2X, XC6206PxxxMR-Regulator_Linear and TXB0101. By type, the board carries 84 switches, 84 diodes, 12 capacitors, 4 ICs, 4 resistors and 2 connectors.

It belongs with the keyboards designs in this gallery.

From the project

Custom keyboard PCB

Main components on the Keyboard

Keyboard bill of materials (BOM)

193 components, 15 distinct parts.

QtyPartRefs
1
STM32F072CBT6
U1
1
PRTR5V0U2X
U2
1
XC6206PxxxMR-Regulator_Linear
U3
1
TXB0101
U5
1
USB_C_Receptacle_USB2.0
J1
1
Conn_01x05
J2
2
SW_SPST
BOOT1, RST1
1
500mA
F1
84
~
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +76
84
D
D1, D2, D3, D4, D5, D6, D7, D8 +76
7
100nF
C1, C3, C4, C5, C6, C7, C8
1
10uF
C2
2
1uF
C9, C10
2
0.1uF
C43, C44
4
5.1k
R1, R2, R3, R4

Keyboard design files

The KiCad project lives in the CalebJM04/Keyboard-PCB repository on GitHub; these links point at the commit this page was built from.

Keyboard: common questions

What microcontroller does the Keyboard use?

The Keyboard is built around the STM32F072CBT6, from the STM32 family.

How big is the Keyboard PCB?

The Keyboard measures 44 × 44.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keyboard?

193 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Keyboard design files?

From the CalebJM04/Keyboard-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Keyboard design in my own project?

The repository has no license, so all rights stay with CalebJM04. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards