98 open source boards using the PRTR5V0U2X
Real designs built with the PRTR5V0U2X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Model-M-Type-C
ashpil
118.3 × 38.9 mm22 parts2LGPL-3.094AVR/Arduino
Filled
kzrtn
59.3 × 63 mm31 parts2LNo license72ESP32
Esp32-4-channel relays
leomanangka
86.4 × 86.6 mm59 parts2LCERN-OHL-P-2.070AVR/Arduino
Cpm43
Gtrx0
232.2 × 76.7 mm184 parts2LCERN-OHL-1.260AVR/Arduino
Barobord
sadekbaroudi
243.9 × 136.5 mm157 parts2LNo license57STM32
Le capybara
sporkus
227.3 × 85 mm64 parts4LCERN-OHL-W-2.057STM32
Stm32 chiffre 36keys
sporkus
227.4 × 84.9 mm115 parts2LCERN-OHL-W-2.053AVR/Arduino
J67G
Salicylic-acid3
285 × 95.1 mm156 parts2LMIT51RP2040/RP2350
Hotswap
dededecline
288.9 × 98.4 mm160 parts2LGPL-3.048AVR/Arduino
KBD8X-MKII
ai03-2725
343.7 × 118.3 mm342 parts2LCC-BY-NC-4.044AVR/Arduino
Lysergic25
Gtrx0
99.1 × 99.1 mm108 parts2LCERN-OHL-1.224AVR/Arduino
Ursa minor keyboard
markstory
298.8 × 122.1 mm134 parts2LCC-BY-NC-4.023RP2040/RP2350
SST80
dededecline
344.7 × 124.1 mm152 parts2LGPL-3.021AVR/Arduino
Celestine
ai03-2725
343.7 × 116.7 mm199 parts2LAGPL-3.019Quad serial breakout
jamesfowkes
50 × 50 mm44 parts2LNo license15STM32
Custom keyboard (f303)
howardt12345
395.3 × 138.1 mm421 parts2LCC-BY-NC-4.014AVR/Arduino
Squid60
Alasofia
269.9 × 87.3 mm143 parts2LCC-BY-NC-4.014STM32
Pando - Left
jyap808
144.1 × 121.5 mm88 parts2LCERN-OHL-S-2.010AVR/Arduino
Alpha dre
AntoineAndre
243.7 × 81.8 mm105 parts2LGPL-3.09AVR/Arduino
Qfwfq
ASH-ART
219.1 × 95.3 mm89 parts2LGPL-3.08AVR/Arduino
Voyager65
foggyflute
303.2 × 94.5 mm211 parts2LGPL-3.07STM32
Vootington V4N STM32G0B1CBT6
calvin-mcd
242.9 × 95.3 mm331 parts2LGPL-3.06RP2040/RP2350
Boethia60
arviceblot
287.3 × 98.4 mm157 parts2LMIT4- schematic only · 267 partsAVR/Arduino
Aek
MythosMann
267 partsGPL-3.04 STM32
Echo Ayla80
phpbbireland
380 × 128 mm339 parts4LGPL-3.03RP2040/RP2350
Duet switch tester
ai03-2725
379.4 × 117.5 mm253 parts2LAGPL-3.03AVR/Arduino
Skeleton68
skeletonkbd
336.6 × 121.7 mm224 parts2LMIT3NXP
MoonLander
graycatlabs
37.9 × 22.7 mm51 parts2LNo license3STM32
75-Analog-Keyboard
matres24
320.8 × 128.3 mm385 parts6LNo license2STM32
ATAT1800
earth75
395 × 122.5 mm331 parts4LNo license2NXP
ADCS-Camera-Payload-Board
NortheasternSatelliteLab
88 × 94.5 mm194 parts4LNo license2STM32
Mioke80B
phpbbireland
376 × 124 mm323 parts2LNo license1AVR/Arduino
SdraKb00
drabaioli
176.2 × 83.4 mm85 parts2LMIT1STM32
4x3 derived
valerietsoi
75 × 57.2 mm47 parts2LNo license1AVR/Arduino
Pico04
HumphreyKwok
38.3 × 41.8 mm33 parts2LMIT1- schematic only · 22 parts
OHIS BT
Reid-n0rc
22 partsCC-BY-NC-4.01
How designs wire the PRTR5V0U2X
Read from the KiCad layouts of 65 open source designs, one per repository: what each pin of the PRTR5V0U2X connects to, and the resistors, capacitors and other passives placed on it.
- The I/O1 pin has a series resistor on 34 of 65 designs, most often 22 Ω (then 27 Ω).
- The IO2 pin has a series resistor on 34 of 65 designs, most often 22 Ω (then 27 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 92% | — |
| I/O1pin 2 | Connected to: A connector 52%, the microcontroller 38% |
|
| IO2pin 3 | Connected to: A connector 54%, the microcontroller 38% |
|
| VCCpin 4 | Connected to: VCC 89% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SST60 - Multi layout 60% by dededecline, Model-M-Type-C by ashpil, Unnamed-3k v2 by kzrtn and Esp32-4-channel relays by leomanangka.
The PRTR5V0U2X in open source designs
The gallery holds 98 open source boards using the PRTR5V0U2X from 68 GitHub repositories; a typical one measures about 219.1 × 94.5 mm and carries around 121 components.
86% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is SST60 - Multi layout 60% by dededecline.
Parts used alongside the PRTR5V0U2X
Microcontrollers on boards using the PRTR5V0U2X
What boards using the PRTR5V0U2X are built for
PRTR5V0U2X: common questions
Where can I find a PRTR5V0U2X reference design?
Each of the 98 boards on this page is a real design using the PRTR5V0U2X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the PRTR5V0U2X I/O1 pin?
The I/O1 pin has a series resistor on 34 of 65 designs, most often 22 Ω (then 27 Ω). Counted from the KiCad layouts of 65 open source designs using the PRTR5V0U2X.
What resistor goes on the PRTR5V0U2X IO2 pin?
The IO2 pin has a series resistor on 34 of 65 designs, most often 22 Ω (then 27 Ω). Counted from the KiCad layouts of 65 open source designs using the PRTR5V0U2X.
What parts are used alongside the PRTR5V0U2X?
The STM32F072CBT6, XC6206PXXXMR-REGULATOR_LINEAR, ATmega32U4-AU, RP2040 and W25Q128JVS appear in the most repositories here.
Which microcontrollers do boards using the PRTR5V0U2X use?
Most are built on AVR/Arduino (38), STM32 (32), RP2040/RP2350 (9) and ESP32 (7).
How big is a typical board using the PRTR5V0U2X?
The median is 219.1 × 94.5 mm, and 86% are two-layer designs.
What is the most popular open source board using the PRTR5V0U2X?
By GitHub stars, SST60 - Multi layout 60% by dededecline, with 107 stars.
Can I simulate one of these boards using the PRTR5V0U2X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.