Joystick interface board
callumsnowden·emfkart·hardware/joystick-interface-board/joystick-interface-board.kicad_pcb
About the Joystick interface board
Joystick interface board is an open source STM32 PCB design by callumsnowden, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 39 mm, with 38 components from 24 distinct parts.
Its main chip is the STM32F042F6P6, from the STM32 family. Other key parts include the SN65HVD232DR, SRH05S05 and LM1117MP-3.3. By type, the board carries 11 capacitors, 11 resistors, 7 connectors, 4 ICs, 2 diodes and 1 transistor.
From the project
A "go-kart" made from aluminium extrusion using hoverboard parts & an ODrive for propulsion.
The eventual aim for this is to be able to trundle around EMF Camp with a bunch of stuff in tow, because I'm lazy and it'd be a fun project (plus actually usable, well, hopefully).
Main components on the Joystick interface board
Joystick interface board bill of materials (BOM)
38 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F042F6P6 STMicroelectronics | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | SN65HVD232DR | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SRH05S05 | SRH05 | U3 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | 2N7002 JSMSEMI | SOT-23 | Q1 |
| 1 | 1x02 2.54mm | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 1x03 2.54mm | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | 1x05 2.54mm | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | 53047-0610 | Molex_PicoBlade_53047-0610_1x06_P1.25mm_Vertical | J4 |
| 2 | 1x02 3.5mm | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J5, J6 |
| 1 | 1x04 3.5mm | TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J7 |
| 1 | SMD1206-020/30N 24V 0.2A BORN | Fuse_1206_3216Metric | F1 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | GSOT03C-E3-08(UMW) GSOT03C-E3-08 UMW | SOT-23 | D2 |
| 6 | C0603B104K500NT 0.1uF TORCH | C_0603_1608Metric | C1, C2, C6, C7, C8, C9 |
| 1 | TCC0603X5R475K250CT 4.7uF CCTC | C_0603_1608Metric | C3 |
| 1 | TCC0603X7R103M500CT 10nF TCC | C_0603_1608Metric | C4 |
| 1 | CL10A105KO8NNNC 1uF Samsung Electro-Mechanics | C_0603_1608Metric | C5 |
| 2 | CL10A106MA8NRNC 10uF Samsung Electro-Mechanics | C_0603_1608Metric | C10, C11 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 120R | R_0805_2012Metric | R1 |
| 6 | 10K | R_0603_1608Metric | R2, R4, R7, R8, R9, R10 |
| 2 | 20K | R_0603_1608Metric | R3, R5 |
| 2 | 470R | R_0603_1608Metric | R6, R11 |
Joystick interface board design files
The KiCad project lives in the callumsnowden/emfkart repository on GitHub; these links point at the commit this page was built from.
Joystick interface board: common questions
What microcontroller does the Joystick interface board use?
The Joystick interface board is built around the STM32F042F6P6, from the STM32 family.
How big is the Joystick interface board?
The Joystick interface board measures 60 × 39 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Joystick interface board?
38 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Joystick interface board design files?
From the callumsnowden/emfkart repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Joystick interface board design in my own project?
Yes, under the terms of its MIT license, which callumsnowden chose for the repository.
Can I test firmware for the Joystick interface board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in emfkart
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k