Power control module
callumsnowden·emfkart·hardware/power-control-module/power-control-module.kicad_pcb
About the Power control module
Power control module is an open source STM32 PCB design by callumsnowden, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 65 mm, with 73 components from 35 distinct parts.
Its main chip is the STM32F042F6Px, from the STM32 family. Other key parts include the INA740, TSR0.6-48120WI, LM1117MP-3.3, INA260 and SN65HVD232. By type, the board carries 19 resistors, 15 connectors, 9 diodes, 9 capacitors, 8 fuses and 6 ICs.
From the project
A "go-kart" made from aluminium extrusion using hoverboard parts & an ODrive for propulsion.
The eventual aim for this is to be able to trundle around EMF Camp with a bunch of stuff in tow, because I'm lazy and it'd be a fun project (plus actually usable, well, hopefully).
Main components on the Power control module
Power control module bill of materials (BOM)
73 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA740 | Texas_REM0014B_14P_VQFN | U1 |
| 1 | TSR0.6-48120WI | Converter_DCDC_TRACO_TSR0.6-48xxWI_TSR0.6-48xxxWI_THT | U2 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | INA260 | TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | STM32F042F6Px | TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | SN65HVD232 | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 6 | 2N7002E | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 2 | Conn_01x01 | ScrewTerminal_XFCN_T44001_M4_5x7.2 | J1, J15 |
| 1 | XT60 | AMASS_XT60-F_1x02_P7.20mm_Vertical | J2 |
| 5 | 39288020 | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J3, J6, J9, J10, J11 |
| 1 | 39288040 | Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | J4 |
| 2 | 430450427 | Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J5, J7 |
| 1 | 430450212 | Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J8 |
| 1 | 2P | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J14 |
| 1 | Conn_02x01 | PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | 1210L050/48WR 0.5A LUTE | Fuse_1210_3225Metric | F1 |
| 1 | 10A | XFCN_XF-506P_PCB_Mini_ATO_Fuseholder | F2 |
| 2 | 2A | XFCN_XF-506P_PCB_Mini_ATO_Fuseholder | F3, F4 |
| 3 | 5A | XFCN_XF-506P_PCB_Mini_ATO_Fuseholder | F5, F6, F7 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SMD1206-020/30N 0.2A BORN | Fuse_1206_3216Metric | F8 |
| 1 | JQX-V5H 012-1HP QLRELAY | QLRELAY_JQX_V5H | K1 |
| 4 | F.0603.00025/P2-0603G1TS2-06T-002 Green TUOZHAN | LED_0603_1608Metric | D1, D4, D5, D6 |
| 1 | 1N5819W | D_SOD-123 | D2 |
| 2 | RCLAMP0502BA | SOT-416 | D3, D9 |
| 2 | F.0603.00021/P2-0603O1TS2-06T-001 Orange TUOZHAN | LED_0603_1608Metric | D7, D8 |
| 5 | 1uF | C_0603_1608Metric | C1, C4, C5, C6, C9 |
| 2 | 10uF | C_0603_1608Metric | C2, C3 |
| 1 | 4.7uF | C_0603_1608Metric | C7 |
| 1 | 10nF | C_0603_1608Metric | C8 |
| 7 | 10K | R_0603_1608Metric | R1, R2, R8, R10, R12, R14, R16 |
| 6 | 3.3K | R_0603_1608Metric | R3, R4, R5, R6, R18, R19 |
| 1 | 120R | R_0805_2012Metric | R7 |
| 3 | 220R | R_0603_1608Metric | R9, R11, R13 |
| 2 | 270R | R_0603_1608Metric | R15, R17 |
Power control module design files
The KiCad project lives in the callumsnowden/emfkart repository on GitHub; these links point at the commit this page was built from.
Power control module: common questions
What microcontroller does the Power control module use?
The Power control module is built around the STM32F042F6Px, from the STM32 family.
How big is the Power control module?
The Power control module measures 100 × 65 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Power control module?
73 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power control module design files?
From the callumsnowden/emfkart repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power control module design in my own project?
Yes, under the terms of its MIT license, which callumsnowden chose for the repository.
Can I test firmware for the Power control module without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in emfkart
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k