The expanse
calvin-mcd·the-expanse·Project/the expanse.kicad_pcb
About the The expanse PCB
The expanse is an open source STM32 PCB design by calvin-mcd, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 276.2 × 76.2 mm, with 113 components from 20 distinct parts.
Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the USBLC6-2SC6 and XC6206PXXXMR-REGULATOR_LINEAR. By type, the board carries 43 diodes, 9 capacitors, 6 switches, 3 ICs, 3 resistors and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
40s keyboard pcb featuring two 625u spacebars
The expanse is a semi-split 40s keyboard pcb featuring two fullsized 625u spacebars for each half. The layout idea was concocted by NoahK and people from their design channel, and I made the pcb using a STM Mcu.
- [X] order & test pcb - [X] create firmware - [ ] print & test case
This PCB has been fully tested and confirmed to work. The members of the PCB development team are however not liable if you end up with a non-functional pcb. Order at your own risk. Support will not be provided but pull requests will be reviewed and possibly accepted.

Main components on the The expanse
The expanse bill of materials (BOM)
113 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072CBT6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | XC6206PXXXMR-REGULATOR_LINEAR XC6206PxxxMR-Regulator_Linear | SOT-23 | U3 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | SMF9.0CA | D_SOD-123 | D_PWR1 |
| 1 | 500MA 500mA | Fuse_1206_3216Metric | F1 |
| 36 | MX_SW_solder | SW_MX_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +28 |
| 1 | MX_SW_solder | SW_MX_1.5u | MX12 |
| 7 | MX_SW_solder | SW_MX_1.25u | MX13, MX24, MX38, MX40, MX43, MX45, MX46 |
| 2 | MX_SW_solder | SW_MX_1.75u | MX25, MX35 |
| 2 | 625 | STAB_MX_P_6.25u | S1, S2 |
| 2 | 275 | STAB_MX_P_2.75u | S3, S4 |
| 1 | ISO | STAB_MX_P_ISO-ROT | S5 |
| 1 | SKQGABE010 | SW_SPST_SKQG_WithStem | SW1 |
| 43 | C81598 D_Small | D_SOD-123F | D1, D2, D3, D4, D5, D6, D7, D8 +35 |
| 6 | 100NF 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C7 |
| 1 | 10UF 10uF | C_0603_1608Metric | C6 |
| 2 | 1UF 1uF | C_0603_1608Metric | C8, C9 |
| 1 | 10K 10k | R_0603_1608Metric | R1 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R2, R3 |
The expanse design files
The KiCad project lives in the calvin-mcd/the-expanse repository on GitHub; these links point at the commit this page was built from.
The expanse: common questions
What microcontroller does the The expanse use?
The The expanse is built around the STM32F072CBT6, from the STM32 family.
How big is the The expanse PCB?
The The expanse measures 276.2 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the The expanse?
113 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the The expanse design files?
From the calvin-mcd/the-expanse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the The expanse design in my own project?
Yes, under the terms of its GPL-3.0 license, which calvin-mcd chose for the repository.
Can I test firmware for the The expanse without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k