EEE3088F CKR

Carciax·EEE3088F-Project-CKR·KiCad Final Changes/EEE3088F_CKR.kicad_pcb

EEE3088F CKR PCB layout, top view — open source STM32 board by Carciax

About the EEE3088F CKR PCB

EEE3088F CKR is an open source STM32 PCB design by Carciax, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 75 mm, with 131 components from 61 distinct parts.

Its main chip is the STM32F051C6_FEMALE_HEADER, from the STM32 family. Other key parts include the LMS33460MG_NOPB, TP4056, XC6206P332MR, GXHTC3 and LTR-303ALS-01. By type, the board carries 60 resistors, 22 test points, 9 transistors, 8 ICs, 8 capacitors and 6 connectors.

It belongs with the sensors, power & battery and dev boards & breakouts designs in this gallery.

From the project

This sensor PCB HAT connects to an STM32F0 microcontroller and adds additional sensing functionality in the form of an ambient light sensor, a temperature and humidity sensor, an thermistor, and a potentiometer (which could be connected to some form of mechanical sensing system,

This sensor PCB HAT connects to an STM32F0 microcontroller and adds additional sensing functionality in the form of an ambient light sensor, a temperature and humidity sensor, an thermistor, and a potentiometer (which could be connected to some form of mechanical sensing system, e.g., a wind vane). The board can be powered directly from USB, or can be powered by an 18650 battery.

Main components on the EEE3088F CKR

LMS33460MG_NOPBTP4056XC6206P332MRGXHTC3LTR-303ALS-0124LC256C404969HT42B534-2

EEE3088F CKR bill of materials (BOM)

131 components, 61 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LMS33460MG_NOPB
U1
1
TP4056
Battery Charger
U2
1
XC6206P332MR
XC6206PxxxMR
U4
1
GXHTC3
U5
1
LTR-303ALS-01
U6
1
24LC256
U7
1
C404969
usb
U8
1
HT42B534-2
U9
8
AO3401A
Q1, Q3, Q4, Q5, Q6, Q7, Q8, Q90
1
AO3400A
Q2
1
X49SM8MSD2SC
Crystal
Y1
2
01X02_MALE_HEADER
01x02_male_header
J1, J2
1
STM32F051C6_FEMALE_HEADER
STM32F051C6_female_header
J3
1
STM32F051C6_TESTPOINTS
STM32F051C6_testpoints
J4
1
STM-link_debugger
J5
1
01X10_MALE_HEADER
01x10_male_header
J6
1
BH-18650-B1BA002
battery holder
B1
4
01X02_MALE_HEADER_JUMPER
01x02_male_header_jumper
JP1, JP2, JP3, JP4
2
01X03_MALE_HEADER_JUMPER
01x03_male_header_jumper
JP5, JP6
1
RK09K1130AJ3
R_Potentiometer
RV1
Show 41 more
QtyPartRefs
1
TS-1187A-B-A-B
Reset switch
SW1
3
TS-1187A-B-A-B
Switch
SW2, SW3, SW4
1
NCP15WF104F03RC
Thermistor
TH1
1
5v
TP1
1
UVLO
TP2
1
battery charger
TP3
1
3.3v out
TP4
1
reverse polarity
TP5
1
Pot ADC
TP6
1
Sensors SDA
TP7
1
Sensors SCL
TP8
1
Therm ADC
TP9
1
Light Interrupt
TP10
1
LED 1
TP11
1
LED 2
TP12
1
Switch 1
TP13
1
Switch 2
TP14
1
Switch 3
TP15
1
uc Tx
TP16
1
uc Rx
TP17
1
Plug Detect
TP18
1
EEPROM SDA
TP19
1
EEPROM SCL
TP20
1
USB D-
TP21
1
USB D+
TP22
1
19-217/GHC-YR1S2/3T
LED_green
D2
1
KT-0603R
LED_red
D3
2
C34499
LED_white
D4, D5
4
CL10A106KP8NNNC
10u
C1, C2, C3, C4
1
CL05B104KO5NNNC
100n
C5
1
CL05A105KA5NQNC
1u
C6
2
0402CG300J500NT
33pF
C7, C8
41
0603WAF0000T5E
0
R1, R2, R15, R16, R18, R19, R20, R21 +33
8
0805W8F3300T5E
1.2k
R3, R9, R11, R14, R17, R22, R38, R39
1
1206W4F1003T5E
100k
R28
2
0805W8F1002T5E
10k
R49, R59
2
0402WGF3901TCE
3.9k
R50, R51
1
0402WGF8201TCE
8.2k
R52
2
0603WAF2002T5E
20k
R60, R800
2
0805W8F1003T5E
100k
R100, R620
1
0805W8F4703T5E
470k
R130

EEE3088F CKR design files

The KiCad project lives in the Carciax/EEE3088F-Project-CKR repository on GitHub; these links point at the commit this page was built from.

EEE3088F CKR: common questions

What microcontroller does the EEE3088F CKR use?

The EEE3088F CKR is built around the STM32F051C6_FEMALE_HEADER, from the STM32 family.

How big is the EEE3088F CKR PCB?

The EEE3088F CKR measures 90 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EEE3088F CKR?

131 components, from 61 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EEE3088F CKR design files?

From the Carciax/EEE3088F-Project-CKR repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EEE3088F CKR design in my own project?

Yes, under the terms of its MIT license, which Carciax chose for the repository.

Can I test firmware for the EEE3088F CKR without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in EEE3088F-Project-CKR

Similar boards