Anndroid robot
catsandgaming·anndroid-robot·Equipment/Anndroid/Anndroid.kicad_pcb
About the Anndroid robot PCB
Anndroid robot is an open source PCB design by catsandgaming, published on GitHub. It is a 2-layer board measuring 55 × 40 mm, with 18 components from 14 distinct parts.
Other key parts include the PAM8302AASCR. By type, the board carries 5 ICs, 5 capacitors, 3 resistors, 2 inductors, 1 crystal and 1 jumper.
It belongs with the robotics & motion designs in this gallery.
From the project
You know the new series Anndroid, well its that but in real life **ONLY USE IF YOU KNOW WHAT YOU ARE DOING!!!*
This project uses two KiCad symbol/footprint libraries, covering the main compute module and the microphone module. Both follow the same general install pattern: add the library file(s) via Preferences > Manage Symbol Libraries... (and Manage Footprint Libraries... where a footprint is included), then verify in the Symbol/Footprint Editor before use.
Schematic symbol libraries (.kicadsym`) for the Raspberry Pi Compute Module series (CM4 and CM5), for KiCad 9. https://github.com/Supercookiegaming/Raspberry-Pi-Compute-Module-KiCad
Main components on the Anndroid robot
Anndroid robot bill of materials (BOM)
18 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PAM8302AASCR | MSOP8_0.65MM | U1 |
| 1 | — | SYMBOL_PLUS | U$3 |
| 1 | — | SYMBOL_MINUS | U$4 |
| 1 | — | ADAFRUIT_3.5MM | U$5 |
| 1 | — | PCBFEAT-REV-040 | U$6 |
| 1 | — | TERMBLOCK_1X2-3.5MM | X1 |
| 1 | — | 1X05_ROUND_70 | JP1 |
| 1 | 10K trim | TRIMPOT_BOURNS_3303W | VR1 |
| 2 | Ferrite | _0805 | FB1, FB2 |
| 2 | 1uF | 0805-NO | C1, C2 |
| 1 | 10uF | 0805-NO | C3 |
| 2 | 220pF | 0805-NO | C4, C5 |
| 2 | 100 | 0805-NO | R1, R2 |
| 1 | 10K | 0805-NO | R3 |
Anndroid robot design files
The KiCad project lives in the catsandgaming/anndroid-robot repository on GitHub; these links point at the commit this page was built from.
Anndroid robot: common questions
How big is the Anndroid robot PCB?
The Anndroid robot measures 55 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Anndroid robot?
18 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Anndroid robot design files?
From the catsandgaming/anndroid-robot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Anndroid robot design in my own project?
The repository has no license, so all rights stay with catsandgaming. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979