12 open source boards using the PAM8302AASCR
Real designs built with the PAM8302AASCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
AGB HiFi Audio Mod
cajunpanda
25.4 × 35.1 mm60 parts4LMIT26ESP32
LiF FC-PCB rev1
aventadoro-ish
70 × 90 mm193 parts4LNo license2RP2040/RP2350
MainBoard
sabas1080
194 × 36 mm78 parts2LNo license2ESP32
DS
bergamifer
118.1 × 101.2 mm607 parts4LNo license0RP2040/RP2350
Adventure board
picorubykaigi
90 × 130 mm361 parts4LCERN-OHL-P-2.00Raspberry Pi
Kids timer
jnd-cz
150 × 150 mm266 parts2LNo license0Raspberry Pi
Digichiver
frindaddy
96.9 × 88.1 mm112 parts4LMIT0Unoq hat
Leif-Rydenfalk
68.6 × 53.3 mm77 parts4LApache-2.00Adafruit PAM8302
NajidPI
24.1 × 15.2 mm18 partsNo license0Anndroid robot
catsandgaming
55 × 40 mm18 parts2LNo license0ESP32
DS9
bergamifer
87.8 × 98 mm291 parts2LNo license0Amod a
gallicchio
100 × 100 mm188 parts4LCERN-OHL-P-2.00
How designs wire the PAM8302AASCR
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the PAM8302AASCR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_6 pin has a decoupling capacitor on 11 of 11 designs, most often 10 µF (then 100 nF).
- The NC_2 pin is left unconnected on 11 of 11 designs.
- The IN+_3 pin has a series resistor on 6 of 11 designs, most often 100 Ω (then 47 kΩ).
- The SD_1 pin has a resistor to GND on 5 of 11 designs, most often 100 kΩ (then 73.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SD_1pin 1 | Connected to: The microcontroller 36% |
|
| NC_2pin 2 | Connected to: Not connected 100% | — |
| IN+_3pin 3 | Connected to: Signal 100% |
|
| IN-_4pin 4 | Connected to: Signal 100% |
|
| VDD_6pin 6 | Connected to: VCC 73% · a signal 27% |
|
| GND_7pin 7 | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AGB HiFi Audio Mod by cajunpanda, LiF FC-PCB rev1 by aventadoro-ish, MainBoard by sabas1080 and DS by bergamifer.
The PAM8302AASCR in open source designs
The gallery holds 12 open source boards using the PAM8302AASCR from 11 GitHub repositories; a typical one measures about 88.9 × 89.1 mm and carries around 150 components.
64% use four copper layers or more, and 42% carry an open source license.
The most starred is AGB HiFi Audio Mod by cajunpanda.
Parts used alongside the PAM8302AASCR
Microcontrollers on boards using the PAM8302AASCR
What boards using the PAM8302AASCR are built for
PAM8302AASCR: common questions
Where can I find a PAM8302AASCR reference design?
Each of the 12 boards on this page is a real design using the PAM8302AASCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PAM8302AASCR VDD_6 pin?
The VDD_6 pin has a decoupling capacitor on 11 of 11 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the PAM8302AASCR.
How is the PAM8302AASCR NC_2 pin connected?
The NC_2 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the PAM8302AASCR.
What resistor goes on the PAM8302AASCR IN+_3 pin?
The IN+_3 pin has a series resistor on 6 of 11 designs, most often 100 Ω (then 47 kΩ). Counted from the KiCad layouts of 11 open source designs using the PAM8302AASCR.
Which microcontrollers do boards using the PAM8302AASCR use?
Most are built on ESP32 (3), RP2040/RP2350 (3) and Raspberry Pi (2).
How big is a typical board using the PAM8302AASCR?
The median is 88.9 × 89.1 mm, and 36% are two-layer designs.
What is the most popular open source board using the PAM8302AASCR?
By GitHub stars, AGB HiFi Audio Mod by cajunpanda, with 26 stars.
Can I simulate one of these boards using the PAM8302AASCR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.