Hackpad v2
Catsarepro21·hackpad_v2·pcb/Fabricate_Wireless_Macropad.kicad_pcb
About the Hackpad v2 PCB
Hackpad v2 is an open source PCB design by Catsarepro21, published on GitHub. It is a 2-layer board measuring 84 × 78 mm, with 67 components from 39 distinct parts.
Other key parts include the XIAO_ESP32S3, MCP23008-E/SO, TPS61023DRL and 74AHCT1G125. By type, the board carries 18 capacitors, 12 LEDs, 10 diodes, 10 resistors, 7 switches and 4 ICs.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
Wireless ESP32-S3 macropad: KiCad PCB, case STEP models, and Gerber/drill fabrication files.
See build and upgrade instructions, shopping BOM, and verification. Open FabricateWirelessMacropad.kicad_pro in KiCad 10. The cheaper build leaves the expander and battery RGB footprints empty; all original footprints remain.
Main components on the Hackpad v2
Hackpad v2 bill of materials (BOM)
67 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO_ESP32S3 | XIAO_S3_Socket_WiredBattery | U1 |
| 1 | MCP23008-E/SO | SOIC-18W_7.5x11.6mm_P1.27mm | U2 |
| 1 | TPS61023DRL | SOT-563 | U3 |
| 1 | 74AHCT1G125 | SOT-23-5 | U4 |
| 2 | AO3401A | SOT-23 | Q1, Q2 |
| 1 | PROTECTED_1S_LIPO_3.7V | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 2 | EC11 | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENC1, ENC2 |
| 1 | MX_KEY_1 | SW_Cherry_MX_1.00u_PCB | SW1 |
| 1 | MX_KEY_2 | SW_Cherry_MX_1.00u_PCB | SW2 |
| 1 | MX_KEY_3 | SW_Cherry_MX_1.00u_PCB | SW3 |
| 1 | MX_KEY_4 | SW_Cherry_MX_1.00u_PCB | SW4 |
| 1 | MX_KEY_5 | SW_Cherry_MX_1.00u_PCB | SW5 |
| 1 | MX_KEY_6 | SW_Cherry_MX_1.00u_PCB | SW6 |
| 1 | JS102011SAQN | SW_SPDT_CK_JS102011SAQN | SW7 |
| 1 | SK6812MINI-E KEY_1 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED1 |
| 1 | SK6812MINI-E KEY_2 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED2 |
| 1 | SK6812MINI-E KEY_3 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED3 |
| 1 | SK6812MINI-E KEY_4 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED4 |
| 1 | SK6812MINI-E KEY_5 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED5 |
| 1 | SK6812MINI-E KEY_6 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED6 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SK6812MINI-E ENC_1 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED7 |
| 1 | SK6812MINI-E ENC_2 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED8 |
| 1 | SK6812MINI-E EDGE_1 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED9 |
| 1 | SK6812MINI-E EDGE_2 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED10 |
| 1 | SK6812MINI-E EDGE_3 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED11 |
| 1 | SK6812MINI-E EDGE_4 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED12 |
| 8 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | SS34 | D_SMA | D9, D10 |
| 1 | SRP5030T-1R0M Bourns | L_Bourns_SRP5030T | L1 |
| 15 | 100n | C_0805_2012Metric | C1, C2, C6, C7, C8, C9, C10, C11 +7 |
| 1 | C1206C106K8RACTU 10u_10V_X7R KEMET | C_1206_3216Metric | C3 |
| 2 | CL32B226KOJNFNE 22u_16V_X7R Samsung Electro-Mechanics | C_1210_3225Metric | C4, C5 |
| 2 | 4.7k | R_0805_2012Metric | R1, R2 |
| 1 | 10k | R_0805_2012Metric | R3 |
| 1 | 732k_1% | R_0805_2012Metric | R4 |
| 1 | 100k_1% | R_0805_2012Metric | R5 |
| 3 | 100k | R_0805_2012Metric | R6, R8, R9 |
| 1 | 330 | R_0805_2012Metric | R7 |
| 1 | 1k | R_0805_2012Metric | R10 |
Hackpad v2 design files
The KiCad project lives in the Catsarepro21/hackpad_v2 repository on GitHub; these links point at the commit this page was built from.
Hackpad v2: common questions
How big is the Hackpad v2 PCB?
The Hackpad v2 measures 84 × 78 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hackpad v2?
67 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hackpad v2 design files?
From the Catsarepro21/hackpad_v2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hackpad v2 design in my own project?
The repository has no license, so all rights stay with Catsarepro21. Use it as a reference, and ask the author before reusing the design.