9 open source boards using the MCP23008-E_SO

Real designs built with the MCP23008-E_SO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the MCP23008-E_SO

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP23008-E_SO connects to, and the resistors, capacitors and other passives placed on it.

  • The N/C pin is left unconnected on 5 of 6 designs.
  • The A2 pin is tied to GND on 4 of 6 designs (a signal on 2).
  • The A1 pin is tied to GND on 4 of 6 designs.
  • The A0 pin is tied to GND on 4 of 6 designs.
SCLpin 1Connected to: The microcontroller 33%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2)
SDApin 2Connected to: A connector 33%, the microcontroller 33%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2)
A2pin 3Connected to: GND 67% · a signal 33%
A1pin 4Connected to: GND 67% · -15V 17% · a signal 17%
A0pin 5Connected to: GND 67% · not connected 17% · a signal 17%
RESETpin 6Connected to: Signal 67% · 5V 33%
  • Pull-up to 3.3V on 50% · 10 kΩ (2)
N/Cpin 7Connected to: Not connected 83% · 15V 17%
INTpin 8Connected to: Not connected 67% · a signal 33%
VSSpin 9Connected to: GND 100%
GP6pin 16Connected to: Not connected 60% · a signal 40%
GP7pin 17Connected to: Not connected 60% · a signal 40%
VDDpin 18Connected to: 3.3V 100%
  • Decoupling capacitor on 40% · 100 nF (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include K9HZ Antenna Tuner Control Board by DRWJSCHMIDT, Hackpad v2 by Catsarepro21, Buffer-Opamp by Gninnorg and ESP32-EFIS by rhine59.

The MCP23008-E_SO in open source designs

The gallery holds 9 open source boards using the MCP23008-E_SO from 6 GitHub repositories; a typical one measures about 84 × 78 mm and carries around 37 components.

78% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is K9HZ Antenna Tuner Control Board by DRWJSCHMIDT.

Microcontrollers on boards using the MCP23008-E_SO

What boards using the MCP23008-E_SO are built for

MCP23008-E_SO: common questions

Where can I find a MCP23008-E_SO reference design?

Each of the 9 boards on this page is a real design using the MCP23008-E_SO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP23008-E_SO N/C pin connected?

The N/C pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the MCP23008-E_SO.

How is the MCP23008-E_SO A2 pin connected?

The A2 pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the MCP23008-E_SO.

How is the MCP23008-E_SO A1 pin connected?

The A1 pin is tied to GND on 4 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the MCP23008-E_SO.

Which microcontrollers do boards using the MCP23008-E_SO use?

Most are built on ESP32 (2) and ESP8266 (1).

How big is a typical board using the MCP23008-E_SO?

The median is 84 × 78 mm, and 78% are two-layer designs.

What is the most popular open source board using the MCP23008-E_SO?

By GitHub stars, K9HZ Antenna Tuner Control Board by DRWJSCHMIDT, with 18 stars.

Can I simulate one of these boards using the MCP23008-E_SO before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part