JammerUsco
CCemons·JammerUsco·PCB/Kicad_Project/JammerUsco/JammerUsco.kicad_pcb
About the JammerUsco PCB
JammerUsco is an open source ESP32 PCB design by CCemons, published on GitHub. It is a 2-layer board measuring 100 × 128.5 mm, with 16 components from 12 distinct parts.
Its main chip is the ESP32_30pin, from the ESP32 family. By type, the board carries 6 connectors and 4 capacitors.
It belongs with the robotics & motion designs in this gallery.
From the project
Prototipo JammerUsco (2.4 GHz): Modelos 3D STEP, diseno de PCB (KiCad/Gerber/CNC) y codigo fuente C++ (ESP32/FreeRTOS) abiertos para estudio y replicacion en laboratorio.
Esta carpeta contiene todos los archivos de diseño asistido por computador (ECAD) y manufactura asistida por computador (CAM) correspondientes a las dos tarjetas de circuito impreso del prototipo JammerUsco:
1. Tarjeta Principal (Mainboard — JammerUsco): Interconecta el módulo ESP32 (30 pines), los dos transceptores nRF24L01+PA+LNA sobre los buses dedicados VSPI y HSPI, la etapa de conversión DC-DC LM2596 (5.0 V), el regulador lineal AMS1117-3.3V dedicado a la etapa de radiofrecuencia, y las cabeceras de conexión para la pantalla OLED $I^2C$ y la botonera. 2. Tarjeta de Botonera (Buttons —…
JammerUsco bill of materials (BOM)
16 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 12V | TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J1 |
| 1 | Display | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Up_down_btts | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Ok_back_btts | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Amp1 | PinHeader_1x02_P2.00mm_Vertical | J5 |
| 1 | Amp2 | PinHeader_1x02_P2.00mm_Vertical | J6 |
| 1 | ~ | ESP32_30pin | ESP32_30pin1 |
| 1 | ~ | LM2596_BUCK_MODULE_5V | LM2596_BUCK_MODULE_5V1 |
| 2 | ~ | NRF24L01_PA_LNA | NRF24L01+PA+LNA1, NRF24L01+PA+LNA2 |
| 2 | ~ | ams1117_module_3.3V | ams1117_3.3V1, ams1117_3.3V2 |
| 2 | C_10uF | CP_Radial_D5.0mm_P2.50mm | C1, C3 |
| 2 | C_0.1uF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C4 |
JammerUsco design files
The KiCad project lives in the CCemons/JammerUsco repository on GitHub; these links point at the commit this page was built from.
JammerUsco: common questions
What microcontroller does the JammerUsco use?
The JammerUsco is built around the ESP32_30pin, from the ESP32 family.
How big is the JammerUsco PCB?
The JammerUsco measures 100 × 128.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the JammerUsco?
16 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the JammerUsco design files?
From the CCemons/JammerUsco repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the JammerUsco design in my own project?
The repository has no license, so all rights stay with CCemons. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the JammerUsco without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in JammerUsco
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k