Cp2102n esp32-programmer
ceafin·cp2102n-esp32-programmer
About the Cp2102n esp32-programmer PCB
Cp2102n esp32-programmer is an open source PCB design by ceafin, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 22.9 × 34.3 mm, with 19 components from 14 distinct parts.
Other key parts include the CP2102N-A02-GQFN24R. By type, the board carries 8 resistors, 4 capacitors, 3 diodes, 2 connectors, 1 IC and 1 transistor.
It belongs with the usb & debug tools and dev boards & breakouts designs in this gallery.
From the project
CP2102N-A02 based USB-to-UART bridge controller for use in programming ESP32 chips and modules
For an interactive BOM, download and view in browser: interactive BOM
Main components on the Cp2102n esp32-programmer
Cp2102n esp32-programmer bill of materials (BOM)
19 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-A02-GQFN24R SILICON LABS | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | UMH3N ROHM Semicon | SOT-363_SC-70-6 | Q1 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | USB Type-C (16 pin) XKB Connectivity | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | Tx Foshan NationStar Optoelectronics | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Rx Foshan NationStar Optoelectronics | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | Power Foshan NationStar Optoelectronics | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 2 | 10uF Samsung Electro-Mechanics | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4 |
| 2 | 100nF FH(Guangdong Fenghua Advanced Tech) | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 5k1 UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 22k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 47k5 FOJAN | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 3 | 470 UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8 |
Cp2102n esp32-programmer design files
The KiCad project lives in the ceafin/cp2102n-esp32-programmer repository on GitHub; these links point at the commit this page was built from.
Cp2102n esp32-programmer: common questions
How big is the Cp2102n esp32-programmer PCB?
The Cp2102n esp32-programmer measures 22.9 × 34.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cp2102n esp32-programmer?
19 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cp2102n esp32-programmer design files?
From the ceafin/cp2102n-esp32-programmer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cp2102n esp32-programmer design in my own project?
Yes, under the terms of its GPL-3.0 license, which ceafin chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979