34 open source boards using the CP2102N-A02-GQFN24R
Real designs built with the CP2102N-A02-GQFN24R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Hw amp
intentfulmotion
61 × 36 mm47 parts2LCERN-OHL-S-2.06SylionX
AmalRajKC
72 × 22 mm41 parts2LCERN-OHL-S-2.04ESP32
A Computer
alexlutsenko7
84.1 × 83.4 mm87 parts4LMIT2Raspberry Pi
Homelabio
nrwiersma
230 × 42 mm71 parts4LNo license2Raspberry Pi
Bugg main r5
bugg-resources
57.3 × 109 mm377 parts6LCC-BY-NC-4.01Gan buck converter
HexaGaN-org
120 × 80 mm184 parts4LNo license1LoRa-V3
Strooom
62 × 50 mm74 parts2LMIT1Silicon Labs
Stillpoint
techmiguel
60 × 60 mm74 parts4LCERN-OHL-S-2.01ESP32
Main v02
bohlebots
80 × 100 mm68 parts2LGPL-2.01Nordic nRF
STAT BOARD
m3llo0n
71.5 × 54.4 mm49 parts4LNo license1Cp2102n esp32-programmer
ceafin
22.9 × 34.3 mm19 parts2LGPL-3.01ESP32
Esp32-p4
Andreuxxx1977
110 × 80 mm221 parts4LCERN-OHL-P-2.00FPGA
FPL
jacobjuneau6
100 × 100 mm134 parts2LMIT0RP2040/RP2350
Mp3-player
stefanVanadium
38.2 × 99.6 mm113 parts4LMIT0AVR/Arduino
Si5351AVFO
etherkit
100 × 65 mm105 parts4LNo license0STM32
RUDRAKINUXIS-Lite
RaviKachhwaha
78.5 × 55 mm100 parts4LNo license0Raspberry Pi
1.2
tomrodinger
46.2 × 30.9 mm86 parts2LApache-2.00ESP32
SolarDataLogger
brokebit
90 × 90 mm64 parts6LCC0-1.00ESP32
Internet radio
Amagami45
97.5 × 97.5 mm52 parts2LAGPL-3.00ESP8266
Lokkarten-Emulator
ST-Oldie
100 × 54 mm50 parts2LGPL-3.00Usb c passthrough
fgihl
65 × 40 mm45 parts4LMIT0Esp32-solar attic fan controller
alex1klimovich
63.5 × 41.5 mm39 parts2LNo license0USB-to-UART-Bridge
kuellenberg
59 × 28 mm30 parts2LNo license0Usbc2uart.up
matchahack
26.7 × 33.8 mm13 parts2LNo license0Usb ttl for esp8266
subraizada3
24 × 20 mm12 parts2LNo license0- schematic only · 97 partsESP32
WateringSystem
cryptotomte
97 parts2LAGPL-3.00 - schematic only · 54 partsESP32
Esp32-light sensor reference
Sid93
54 partsNo license0 ESP8266
Lokkkarten Emulator
GBert
100 × 54 mm50 parts2LNo license36Module usb
Karpova-Lab
48.6 × 17.2 mm13 parts2LNo license30RP2040/RP2350
Speek rx
JBlitzar
80 × 60 mm51 parts2LGPL-3.01Debug Adapter
PicoballoonLabs
20 × 38.1 mm34 parts2LMIT1Raspberry Pi
V9
tomrodinger
46.7 × 30.9 mm76 parts2LApache-2.00FPGA
FPL marked
jacobjuneau6
100 × 99.8 mm60 parts4LMIT0Raspberry Pi
1.1
tomrodinger
46.2 × 30.9 mm75 parts2LApache-2.00
How designs wire the CP2102N-A02-GQFN24R
Read from the KiCad layouts of 29 open source designs, one per repository: what each pin of the CP2102N-A02-GQFN24R connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 26 of 29 designs, most often 100 nF (then 4.7 µF).
- The VREGIN pin has a decoupling capacitor on 25 of 29 designs, most often 100 nF (then 4.7 µF).
- The RI/CLK pin is left unconnected on 28 of 29 designs.
- The DCD pin is left unconnected on 28 of 29 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RI/CLKpin 1 | Connected to: Not connected 97% | — |
| GNDpin 2, 25 | Connected to: GND 100% | — |
| VIOpin 5 | Connected to: 3.3V 66% · a signal 31% |
|
| VDDpin 6 | Connected to: 3.3V 62% · a signal 38% |
|
| VREGINpin 7 | Connected to: VBUS 90% |
|
| VBUSpin 8 | Connected to: Signal 62% · VBUS 38% |
|
| RSTpin 9 | Connected to: Signal 97% |
|
| NCpin 10, 16 | Connected to: Not connected 100% | — |
| WAKEUP/GPIO.3pin 11 | Connected to: Not connected 93% | — |
| RS485/GPIO.2pin 12 | Connected to: Not connected 93% | — |
| RXT/GPIO.1pin 13 | Connected to: Not connected 72% · a signal 28% | — |
| TXT/GPIO.0pin 14 | Connected to: Not connected 72% · a signal 28% | — |
| SUSPENDpin 15, 17 | Connected to: Not connected 93% | — |
| CTSpin 18 | Connected to: Not connected 90% | — |
| RTSpin 19 | Connected to: Signal 52% · not connected 48% |
|
| DSRpin 22 | Connected to: Not connected 93% | — |
| DTRpin 23 | Connected to: Not connected 55% · a signal 45% |
|
| DCDpin 24 | Connected to: Not connected 97% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lokkkarten Emulator by GBert, Module usb by Karpova-Lab, Hw amp by intentfulmotion and SylionX by AmalRajKC.
The CP2102N-A02-GQFN24R in open source designs
The gallery holds 34 open source boards using the CP2102N-A02-GQFN24R from 31 GitHub repositories; a typical one measures about 68.3 × 54 mm and carries around 62 components.
61% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is Lokkkarten Emulator by GBert.
Parts used alongside the CP2102N-A02-GQFN24R
Microcontrollers on boards using the CP2102N-A02-GQFN24R
What boards using the CP2102N-A02-GQFN24R are built for
CP2102N-A02-GQFN24R: common questions
Where can I find a CP2102N-A02-GQFN24R reference design?
Each of the 34 boards on this page is a real design using the CP2102N-A02-GQFN24R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CP2102N-A02-GQFN24R VDD pin?
The VDD pin has a decoupling capacitor on 26 of 29 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 29 open source designs using the CP2102N-A02-GQFN24R.
What decoupling capacitors do designs use on the CP2102N-A02-GQFN24R VREGIN pin?
The VREGIN pin has a decoupling capacitor on 25 of 29 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 29 open source designs using the CP2102N-A02-GQFN24R.
How is the CP2102N-A02-GQFN24R RI/CLK pin connected?
The RI/CLK pin is left unconnected on 28 of 29 designs. Counted from the KiCad layouts of 29 open source designs using the CP2102N-A02-GQFN24R.
What parts are used alongside the CP2102N-A02-GQFN24R?
The USBLC6-2SC6, AMS1117-3.3, AP2112K-3.3TRG1, BL1551B and ESP-12F appear in the most repositories here.
Which microcontrollers do boards using the CP2102N-A02-GQFN24R use?
Most are built on ESP32 (8), Raspberry Pi (5), RP2040/RP2350 (2) and ESP8266 (2).
How big is a typical board using the CP2102N-A02-GQFN24R?
The median is 68.3 × 54 mm, and 61% are two-layer designs.
What is the most popular open source board using the CP2102N-A02-GQFN24R?
By GitHub stars, Lokkkarten Emulator by GBert, with 36 stars.
Can I simulate one of these boards using the CP2102N-A02-GQFN24R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.