STM32F745VE Module

celeritous·STM32F745VE_Module·STM32F745VE_Hardware/REV1.0/STM32F745VE_Module.kicad_pcb

STM32F745VE Module layout, top view — open source STM32 board by celeritous

About the STM32F745VE Module

STM32F745VE Module is an open source STM32 PCB design by celeritous, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 60 components from 28 distinct parts.

Its main chip is the STM32F745VE, from the STM32 family. Other key parts include the KSZ8081RNA, 24AA02E64OT and MCP1501-30. By type, the board carries 25 capacitors, 12 resistors, 9 connectors, 4 ICs, 4 diodes and 2 crystals.

From the project

The design is in KiCad and is released under the CERN OHL Ver 1.2 It is on a 50mm x 50mm 4 layer PCB with two 38 Pin dual row 100mil headers for user power and IO. There is no on-board voltage regulation so the user must supply regulated 3.3V power to the board.

The design is in KiCad and is released under the CERN OHL Ver 1.2 It is on a 50mm x 50mm 4 layer PCB with two 38 Pin dual row 100mil headers for user power and IO. There is no on-board voltage regulation so the user must supply regulated 3.3V power to the board.

Features include a USB FS and HS ports that can function as host or client as well as and optional uSD card slot and optional Ethernet RMII PHY chip and connector.

Main components on the STM32F745VE Module

STM32F745VE Module bill of materials (BOM)

60 components, 28 distinct parts.

QtyPartRefs
1
STM32F745VE
U1
1
KSZ8081RNA
U2
1
24AA02E64OT
U3
1
MCP1501-30
U4
1
ABS10-32.768kHz
X1
1
ABM8G-12.00MHz
X2
1
CONNECTOR_RJ45_SI-60062
J1
1
SOCKET_MICRO_SD_SMT_3M
J2
2
USB_MINI_B_SMD
J3, J4
1
CONN_1x4
P1
2
Header_2x17
P2, P3
2
Header_2x1
P4, P5
1
FUSE_PTC_.75A_33V
F1
1
PUSHBUTTON_SPST_6MM_SMD
SW1
2
USBLC6-2
D1, D2
1
SMP3V3
D3
1
D_Small
D4
2
FERRITE_BEAD
L1, L2
4
12pF
C1, C2, C3, C4
10
0.10uF
C5, C6, C8, C9, C11, C13, C14, C15 +2
Show 8 more
QtyPartRefs
3
2.2uF
C7, C23, C24
7
10.0uF
C10, C12, C18, C19, C20, C21, C22
1
0.010uF
C25
1
6.49kΩ
R1
2
220.0Ω
R2, R3
5
4.70kΩ
R4, R5, R6, R7, R8
2
ZERO_Ω
R9, R10
2
1.50kΩ
R11, R12

STM32F745VE Module design files

The KiCad project lives in the celeritous/STM32F745VE_Module repository on GitHub; these links point at the commit this page was built from.

STM32F745VE Module: common questions

What microcontroller does the STM32F745VE Module use?

The STM32F745VE Module is built around the STM32F745VE, from the STM32 family.

How big is the STM32F745VE Module?

The STM32F745VE Module measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F745VE Module?

60 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32F745VE Module design files?

From the celeritous/STM32F745VE_Module repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the STM32F745VE Module design in my own project?

The repository has no license, so all rights stay with celeritous. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32F745VE Module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in STM32F745VE_Module

Similar boards