5 open source boards using the KSZ8081RNA
Real designs built with the KSZ8081RNA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Imxrt1020-module
martinribelotta
136 × 58 mm133 parts2LBSD-3-Clause37STM32
H7value
martinribelotta
63.5 × 73.7 mm60 parts2LNo license12STM32
Preroute
celeritous
50 × 50 mm62 parts2LNo license0STM32
STM32F745VE REV1.1
celeritous
50 × 50 mm62 parts2LNo license0STM32
STM32F745VE Module
celeritous
50 × 50 mm60 parts2LNo license0
The KSZ8081RNA in open source designs
The gallery holds 5 open source boards using the KSZ8081RNA from 3 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 62 components.
100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Imxrt1020-module by martinribelotta.
Microcontrollers on boards using the KSZ8081RNA
KSZ8081RNA: common questions
Where can I find a KSZ8081RNA reference design?
Each of the 5 boards on this page is a real design using the KSZ8081RNA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the KSZ8081RNA use?
Most are built on STM32 (4).
How big is a typical board using the KSZ8081RNA?
The median is 50 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the KSZ8081RNA?
By GitHub stars, Imxrt1020-module by martinribelotta, with 37 stars.
Can I simulate one of these boards using the KSZ8081RNA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.