STM32F745VE REV1.1
celeritous·STM32F745VE_Module·STM32F745VE_Hardware/REV1.1/STM32F745VE_REV1.1.kicad_pcb
About the STM32F745VE REV1.1 PCB
STM32F745VE REV1.1 is an open source STM32 PCB design by celeritous, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 62 components from 28 distinct parts.
Its main chip is the STM32F745VE, from the STM32 family. Other key parts include the KSZ8081RNA, 24AA02E64OT and MCP1501-30. By type, the board carries 25 capacitors, 14 resistors, 9 connectors, 4 ICs, 4 diodes and 2 crystals.
From the project
The design is in KiCad and is released under the CERN OHL Ver 1.2 It is on a 50mm x 50mm 4 layer PCB with two 38 Pin dual row 100mil headers for user power and IO. There is no on-board voltage regulation so the user must supply regulated 3.3V power to the board.
The design is in KiCad and is released under the CERN OHL Ver 1.2 It is on a 50mm x 50mm 4 layer PCB with two 38 Pin dual row 100mil headers for user power and IO. There is no on-board voltage regulation so the user must supply regulated 3.3V power to the board.
Features include a USB FS and HS ports that can function as host or client as well as and optional uSD card slot and optional Ethernet RMII PHY chip and connector.
Main components on the STM32F745VE REV1.1
STM32F745VE REV1.1 bill of materials (BOM)
62 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F745VE | QFP_100_14X14_0.5 | U1 |
| 1 | KSZ8081RNA | QFN24_4X4mm_0.5mm_PWR | U2 |
| 1 | 24AA02E64OT | SOT23-6 | U3 |
| 1 | MCP1501-30 | SOT23-6 | U4 |
| 1 | ABS10-32.768kHz | XTAL_1.8X4.9mm | X1 |
| 1 | ABM8G-12.00MHz | XTAL_3.2X2.5 | X2 |
| 1 | CONNECTOR_RJ45_SI-60062 | CONNECTOR_ETHERNET_SI60062 | J1 |
| 1 | SOCKET_MICRO_SD_SMT_3M | CONN_SDMICRO_3M | J2 |
| 2 | USB_MINI_B_SMD | CONN_USB_UX60-MB | J3, J4 |
| 1 | CONN_1x4 | Connector_1x4_100mil_TH | P1 |
| 2 | Header_2x17 | Header_2x17_Shrouded_100mil | P2, P3 |
| 2 | Header_2x1 | Header_2x1_Shrouded_100mil | P4, P5 |
| 1 | FUSE_PTC_.75A_33V | P1812 | F1 |
| 1 | PUSHBUTTON_SPST_6MM_SMD | SWITCH_6MM_PB | SW1 |
| 2 | USBLC6-2 | SOT23-6 | D1, D2 |
| 1 | SMP3V3 | SOD123 | D3 |
| 1 | D_Small | MINI_SMA | D4 |
| 2 | FERRITE_BEAD | P0603 | L1, L2 |
| 4 | 12pF | P0603 | C1, C2, C3, C4 |
| 10 | 0.10uF | P0603 | C5, C6, C8, C9, C11, C13, C14, C15 +2 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 2.2uF | P0603 | C7, C23, C24 |
| 7 | 10.0uF | P0603 | C10, C12, C18, C19, C20, C21, C22 |
| 1 | 0.010uF | P0603 | C25 |
| 1 | 6.49kΩ | P0603 | R1 |
| 2 | 220.0Ω | P0603 | R2, R3 |
| 6 | 4.70kΩ | P0603 | R4, R5, R6, R7, R8, R14 |
| 3 | ZERO_Ω | P0603 | R9, R10, R13 |
| 2 | 1.50kΩ | P0603 | R11, R12 |
STM32F745VE REV1.1 design files
The KiCad project lives in the celeritous/STM32F745VE_Module repository on GitHub; these links point at the commit this page was built from.
STM32F745VE REV1.1: common questions
What microcontroller does the STM32F745VE REV1.1 use?
The STM32F745VE REV1.1 is built around the STM32F745VE, from the STM32 family.
How big is the STM32F745VE REV1.1 PCB?
The STM32F745VE REV1.1 measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F745VE REV1.1?
62 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F745VE REV1.1 design files?
From the celeritous/STM32F745VE_Module repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32F745VE REV1.1 design in my own project?
The repository has no license, so all rights stay with celeritous. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F745VE REV1.1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in STM32F745VE_Module
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k