NeuroPhy Card Full
Cerybra·physarum-biocomputer·adaptors/card-full/card-full.kicad_pcb
About the NeuroPhy Card Full PCB
NeuroPhy Card Full is an open source PCB design by Cerybra, published on GitHub under the AGPL-3.0 license. It is a 6-layer board measuring 128.8 × 60 mm, with 22 components from 4 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
The official repository of the Cerybra Biocomputer.
The project structure is organized as follows:
- 📂 adaptors: contains all of the hardware files for the various adaptors that are compatible with the biocomputer carrier board.
- 📂 data: contains all of the experimentally collected data.
- 📂 devices: contains all of the hardware files for both the open-air and enclosure-type devices.
- 📂 modules: contains all of the hardware files for each of the biocomputer modules.

NeuroPhy Card Full bill of materials (BOM)
22 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | C496549 Conn_Coaxial | 1333801201 | J1, J2, J3, J4, J5, J6, J7, J8 +2 |
| 6 | Conn_Coaxial | 1333801201 | J11, J12, J13, J14, J15, J16 |
| 4 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J17, J18, J19, J20 |
| 2 | Conn_Coaxial | SMA_Amphenol_132134-11_Vertical | J21, J22 |
NeuroPhy Card Full design files
The KiCad project lives in the Cerybra/physarum-biocomputer repository on GitHub; these links point at the commit this page was built from.
NeuroPhy Card Full: common questions
How big is the NeuroPhy Card Full PCB?
The NeuroPhy Card Full measures 128.8 × 60 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the NeuroPhy Card Full?
22 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NeuroPhy Card Full design files?
From the Cerybra/physarum-biocomputer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NeuroPhy Card Full design in my own project?
Yes, under the terms of its AGPL-3.0 license, which Cerybra chose for the repository.
More boards in physarum-biocomputer
DAQ Evaluation Board
Cerybra
165 × 100 mm236 parts6LAGPL-3.00NeuroPhy Biocomputer Evaluation Motherboard
Cerybra
400 × 200 mm89 parts4LAGPL-3.00Dual Rail Eval Board
Cerybra
65 × 100 mm77 parts4LAGPL-3.00LTC2666 Eval Board
Cerybra
50 × 50 mm26 parts6LAGPL-3.00MAX14662 Evaluation Board
Cerybra
50 × 50 mm26 parts4LAGPL-3.00NeuroPhy Configurable Adaptor
Cerybra
60 × 60 mm20 parts2LAGPL-3.00Card half
Cerybra
80 × 60 mm13 parts2LAGPL-3.008x1-adaptor
Cerybra
60 × 60 mm12 parts2LAGPL-3.004x1-adaptor
Cerybra
60 × 60 mm8 parts2LAGPL-3.001x1-adaptor
Cerybra
60 × 60 mm5 parts2LAGPL-3.00Neurophy adaptor
Cerybra
60 × 60 mm5 parts2LAGPL-3.00
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979