Dual Rail Eval Board
Cerybra·physarum-biocomputer·modules/dual-rail-power-eval-module/dual-rail-power-eval-module.kicad_pcb
About the Dual Rail Eval Board
Dual Rail Eval Board is an open source PCB design by Cerybra, published on GitHub under the AGPL-3.0 license. It is a 4-layer board measuring 65 × 100 mm, with 77 components from 23 distinct parts.
Other key parts include the LM27762, TPS7A4901DRBR and TPS7A3001DRBR. By type, the board carries 24 capacitors, 22 test points, 14 resistors, 10 connectors, 5 ICs and 2 inductors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
The official repository of the Cerybra Biocomputer.
The project structure is organized as follows:
- 📂 adaptors: contains all of the hardware files for the various adaptors that are compatible with the biocomputer carrier board.
- 📂 data: contains all of the experimentally collected data.
- 📂 devices: contains all of the hardware files for both the open-air and enclosure-type devices.
- 📂 modules: contains all of the hardware files for each of the biocomputer modules.

Main components on the Dual Rail Eval Board
Dual Rail Eval Board bill of materials (BOM)
77 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM27762 | DSS0012B | U1 |
| 2 | TPS7A4901DRBR | VSON-8 | U2, U4 |
| 2 | TPS7A3001DRBR | VSON-8 | U3, U5 |
| 10 | C496549 Conn_Coaxial | CONN_RF2-04A-T-00-50-G_ADM | J1, J2, J3, J4, J5, J6, J7, J8 +2 |
| 6 | C5199900 TestPoint | KEYSTONE_5000 | TP1, TP2, TP3, TP4, TP5, TP6 |
| 6 | C2906764 TestPoint | KEYSTONE_5006 | TP7, TP8, TP9, TP10, TP11, TP12 |
| 10 | Turret | TestPoint_Plated_Hole_D2.0mm | TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 +2 |
| 2 | 100uH | L_0805_2012Metric | L1, L2 |
| 6 | 10uF | C_0805_2012Metric | C1, C2, C15, C16, C23, C24 |
| 1 | 1uF | C_0402_1005Metric | C3 |
| 1 | 4.7uF | C_0402_1005Metric | C4 |
| 2 | 22uF | C_0805_2012Metric | C5, C6 |
| 2 | 100uF | C_0805_2012Metric | C7, C8 |
| 8 | 10nF | C_0402_1005Metric | C9, C10, C11, C12, C17, C18, C19, C20 |
| 4 | 100nF | C_0402_1005Metric | C13, C14, C21, C22 |
| 2 | 221k | R_0402_1005Metric | R1, R3 |
| 1 | 68.9k | R_0402_1005Metric | R2 |
| 1 | 69.8k | R_0402_1005Metric | R4 |
| 2 | 1.3 | R_0805_2012Metric | R5, R6 |
| 2 | 47k | R_0402_1005Metric | R7, R9 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 35k7 | R_0402_1005Metric | R8, R10 |
| 2 | 97k6 | R_0402_1005Metric | R11, R13 |
| 2 | 30k1 | R_0402_1005Metric | R12, R14 |
Dual Rail Eval Board design files
The KiCad project lives in the Cerybra/physarum-biocomputer repository on GitHub; these links point at the commit this page was built from.
Dual Rail Eval Board: common questions
How big is the Dual Rail Eval Board?
The Dual Rail Eval Board measures 65 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Dual Rail Eval Board?
77 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dual Rail Eval Board design files?
From the Cerybra/physarum-biocomputer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dual Rail Eval Board design in my own project?
Yes, under the terms of its AGPL-3.0 license, which Cerybra chose for the repository.
More boards in physarum-biocomputer
DAQ Evaluation Board
Cerybra
165 × 100 mm236 parts6LAGPL-3.00NeuroPhy Biocomputer Evaluation Motherboard
Cerybra
400 × 200 mm89 parts4LAGPL-3.00LTC2666 Eval Board
Cerybra
50 × 50 mm26 parts6LAGPL-3.00MAX14662 Evaluation Board
Cerybra
50 × 50 mm26 parts4LAGPL-3.00NeuroPhy Card Full
Cerybra
128.8 × 60 mm22 parts6LAGPL-3.00NeuroPhy Configurable Adaptor
Cerybra
60 × 60 mm20 parts2LAGPL-3.00Card half
Cerybra
80 × 60 mm13 parts2LAGPL-3.008x1-adaptor
Cerybra
60 × 60 mm12 parts2LAGPL-3.004x1-adaptor
Cerybra
60 × 60 mm8 parts2LAGPL-3.001x1-adaptor
Cerybra
60 × 60 mm5 parts2LAGPL-3.00Neurophy adaptor
Cerybra
60 × 60 mm5 parts2LAGPL-3.00
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979