Buck-Converter
Ch3ema·Buck-Converter
About the Buck-Converter PCB
Buck-Converter is an open source PCB design by Ch3ema, published on GitHub. It is a 2-layer board measuring 42.5 × 24.5 mm, with 8 components from 7 distinct parts.
By type, the board carries 3 connectors, 2 capacitors, 1 transistor, 1 diode and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
A hand-calculated, simulated, and laid-out synchronous-less buck converter power stage. Designed from first principles rather than from a reference design, with every component value derived by hand and then verified in LTspice before layout.
A hand-calculated, simulated, and laid-out synchronous-less buck converter power stage. Designed from first principles rather than from a reference design, with every component value derived by hand and then verified in LTspice before layout.
Scope: this is the power stage only. It is open loop and requires an external floating gate drive to operate. See Limitations before building it.
Buck-Converter bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IRLZ44N | TO-220-3_Vertical | Q1 |
| 2 | Conn_01x02_Pin | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | MBRS340 | D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 16.2u | L_Radial_D12.0mm_P5.00mm_Fastron_11P | L1 |
| 1 | 5u | CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 100u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
Buck-Converter design files
The KiCad project lives in the Ch3ema/Buck-Converter repository on GitHub; these links point at the commit this page was built from.
- LayoutBuckConverter.kicad_pcb
- SchematicBuckConverter.kicad_sch
Buck-Converter: common questions
How big is the Buck-Converter PCB?
The Buck-Converter measures 42.5 × 24.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buck-Converter?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Buck-Converter design files?
From the Ch3ema/Buck-Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Buck-Converter design in my own project?
The repository has no license, so all rights stay with Ch3ema. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k