5-voltage to-3.3-via usb c pin pcb design-
chaitya37·5-voltage-to-3.3-via-usb-c-pin-pcb-design-
About the 5-voltage to-3.3-via usb c pin pcb design-
5-voltage to-3.3-via usb c pin pcb design- is an open source PCB design by chaitya37, published on GitHub. It is a 2-layer board measuring 21.3 × 29.5 mm, with 10 components from 7 distinct parts.
Other key parts include the AMS1117-3.3. By type, the board carries 4 resistors, 2 connectors, 2 capacitors, 1 IC and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
This project is about 5 voltage to 3.3 via usb-c pin , with output including two voltages one 3.3 and 5 voltages , this is kicad pcb design
A compact power supply board that takes USB-C 5V input and provides regulated 5V (passthrough) and 3.3V outputs, with an onboard LED indicator for the 3.3V rail. Designed in KiCad.
See schematic.pdf for the full schematic.
- CC1/CC2 (5.1kΩ to GND): Required per USB Type-C spec so the source negotiates default 5V/900mA-1.5A power — without these the connector won't output any power at all. - AMS1117-3.3 regulator: Chosen for simplicity and wide availability. Input/output capacitors (10µF each) placed close to the IC per datasheet recommendations for stability. - LED indicator: Wired in…
Main components on the 5-voltage to-3.3-via usb c pin pcb design-
5-voltage to-3.3-via usb c pin pcb design- bill of materials (BOM)
10 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | USB_C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 2 | 10 microF | C_1206_3216Metric | C1, C2 |
| 2 | 5.1 kohm | R_0805_2012Metric | R1, R2 |
| 2 | 330 ohm | R_0805_2012Metric | R3, R4 |
5-voltage to-3.3-via usb c pin pcb design- design files
The KiCad project lives in the chaitya37/5-voltage-to-3.3-via-usb-c-pin-pcb-design- repository on GitHub; these links point at the commit this page was built from.
5-voltage to-3.3-via usb c pin pcb design-: common questions
How big is the 5-voltage to-3.3-via usb c pin pcb design-?
The 5-voltage to-3.3-via usb c pin pcb design- measures 21.3 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 5-voltage to-3.3-via usb c pin pcb design-?
10 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the 5-voltage to-3.3-via usb c pin pcb design- design files?
From the chaitya37/5-voltage-to-3.3-via-usb-c-pin-pcb-design- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 5-voltage to-3.3-via usb c pin pcb design- design in my own project?
The repository has no license, so all rights stay with chaitya37. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k