A register

ChargeInMotion·8bit-breadboard-computer·design/pcb-modules/A_register/A_register.kicad_pcb

A register PCB layout, top view — open source board by ChargeInMotion

About the A register PCB

A register is an open source PCB design by ChargeInMotion, published on GitHub under the MIT license. It is a 2-layer board measuring 67.6 × 11.8 mm, with 20 components from 5 distinct parts.

Other key parts include the 74LS245 and 74LS173. By type, the board carries 8 diodes, 8 resistors, 3 ICs and 1 capacitor.

It belongs with the dev boards & breakouts and wearables designs in this gallery.

From the project

Faithful recreation of Ben Eater's 8-bit SAP-1 breadboard computer — final-year team project, breadboard to PCB.

The whole machine on breadboards, every module wired and labelled by hand.

A faithful recreation of Ben Eater's 8-bit computer, the SAP-1 ("Simple As Possible") architecture from Malvino's Digital Computer Electronics, built as our final-year college project, first on breadboards and then as a soldered PCB. The goal was to understand, at the wire level, how a CPU actually works: how a clock drives a shared bus, how registers latch and release, how an ALU adds, and how a few EEPROMs become a control unit.

A register, from the project README
From the project README

Main components on the A register

A register bill of materials (BOM)

20 components, 5 distinct parts.

QtyPartRefs
1
74LS245
U7
2
74LS173
U8, U9
8
RED
D10, D11, D12, D13, D14, D15, D16, D17
1
0.1uF
C11
8
220
R24, R25, R26, R27, R28, R29, R30, R31

A register design files

The KiCad project lives in the ChargeInMotion/8bit-breadboard-computer repository on GitHub; these links point at the commit this page was built from.

A register: common questions

How big is the A register PCB?

The A register measures 67.6 × 11.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the A register?

20 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the A register design files?

From the ChargeInMotion/8bit-breadboard-computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the A register design in my own project?

Yes, under the terms of its MIT license, which ChargeInMotion chose for the repository.

More boards in 8bit-breadboard-computer

Similar boards