56 open source boards using the 74LS173

Real designs built with the 74LS173, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

56 boardsClear filters|Most starred

How designs wire the 74LS173

Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the 74LS173 connects to, and the resistors, capacitors and other passives placed on it.

  • The OE2 pin is tied to GND on 21 of 24 designs (a signal on 3).
  • The OE1 pin is tied to GND on 20 of 24 designs (a signal on 4).
  • The CP pin has a series capacitor on 10 of 24 designs, most often 10 nF (then 100 nF).
OE1pin 1Connected to: GND 83% · a signal 17%
OE2pin 2Connected to: GND 88%
CPpin 7Connected to: A connector 46%, 74LS04 38%, 74LS08 38%
  • Series capacitor on 42% · 10 nF (9), 100 nF (1)
GNDpin 8Connected to: GND 100%
D3pin 11Connected to: 74LS245 63%, 74LS173 54%, 74LS157 38%
  • Resistor to GND on 33% · 10 kΩ (8)
D2pin 12Connected to: 74LS245 63%, 74LS173 54%, 74LS157 38%
  • Resistor to GND on 33% · 10 kΩ (8)
D1pin 13Connected to: 74LS245 63%, 74LS173 54%, 74LS157 33%
  • Resistor to GND on 33% · 10 kΩ (8)
D0pin 14Connected to: 74LS245 63%, 74LS173 54%, 74LS157 33%
  • Resistor to GND on 33% · 10 kΩ (8)
VCCpin 16Connected to: 5V 100%
  • Decoupling capacitor on 39% · 100 nF (6), 10 nF (1), 1 µF (1)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Eda designs by kyllikki, Instruction Register by Shmerlard, SAP-Plus ALU by TomNisbet and MARMEM by rraider.

The 74LS173 in open source designs

The gallery holds 56 open source boards using the 74LS173 from 29 GitHub repositories; a typical one measures about 100 × 76.2 mm and carries around 36 components.

73% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is Eda designs by kyllikki.

Microcontrollers on boards using the 74LS173

74LS173: common questions

Where can I find a 74LS173 reference design?

Each of the 56 boards on this page is a real design using the 74LS173. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74LS173 OE2 pin connected?

The OE2 pin is tied to GND on 21 of 24 designs (a signal on 3). Counted from the KiCad layouts of 24 open source designs using the 74LS173.

How is the 74LS173 OE1 pin connected?

The OE1 pin is tied to GND on 20 of 24 designs (a signal on 4). Counted from the KiCad layouts of 24 open source designs using the 74LS173.

How is the 74LS173 CP pin connected?

The CP pin has a series capacitor on 10 of 24 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 24 open source designs using the 74LS173.

What parts are used alongside the 74LS173?

The 74LS08, 74LS245, 74LS04, 74LS157 and 74LS32 appear in the most repositories here.

Which microcontrollers do boards using the 74LS173 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 74LS173?

The median is 100 × 76.2 mm, and 73% are two-layer designs.

What is the most popular open source board using the 74LS173?

By GitHub stars, Eda designs by kyllikki, with 32 stars.

Can I simulate one of these boards using the 74LS173 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part