Embedded playground

charypar·embedded-playground·spinny/hardware/Spinny.kicad_pcb

Embedded playground PCB layout, top view — open source STM32 board by charypar

About the Embedded playground PCB

Embedded playground is an open source STM32 PCB design by charypar, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 32 components from 21 distinct parts.

Its main chip is the STM32F103CBTX, from the STM32 family. Other key parts include the XC6206P332MR and SRV05-4. By type, the board carries 12 capacitors, 6 resistors, 5 switches, 3 ICs, 2 connectors and 2 diodes.

From the project

Experiments with ebedded programming

Main components on the Embedded playground

Embedded playground bill of materials (BOM)

32 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XC6206P332MR
U1
1
SRV05-4
U2
1
STM32F103CBTX
STM32F103CBT6
U3
1
8MHZ
8Mhz
Y1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
1
CONN_01X04
Conn_01x04
J2
1
PEC11R-4215F-S0024
MT1
4
SW_Push
SW1, SW2, SW3, SW4
1
C318884
SW_RST
SW5
1
C72043
GREEN
D1
1
C2290
WHITE
D2
4
1u
C1, C2, C8, C12
1
4U7
4u7
C3
4
100N
100n
C4, C5, C6, C7
1
10N
10n
C9
2
30P
30p
C10, C11
2
5K1
5k1
R1, R2
1
220
R3
1
100K
100k
R4
1
1K5
1k5
R5
Show 1 more
QtyPartRefs
1
330
R6

Embedded playground design files

The KiCad project lives in the charypar/embedded-playground repository on GitHub; these links point at the commit this page was built from.

Embedded playground: common questions

What microcontroller does the Embedded playground use?

The Embedded playground is built around the STM32F103CBTX, from the STM32 family.

How big is the Embedded playground PCB?

The Embedded playground measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Embedded playground?

32 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Embedded playground design files?

From the charypar/embedded-playground repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Embedded playground design in my own project?

The repository has no license, so all rights stay with charypar. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Embedded playground without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards