Carvel Breakout board as M.2 Card
About the Carvel Breakout board as M.2 Card
Carvel Breakout board as M.2 Card is an open source PCB design by chipfoundry, published on GitHub. It is a 4-layer board measuring 22 × 22 mm, with 11 components from 5 distinct parts.
Other key parts include the AZ1117CH-1.8TRG1. By type, the board carries 9 capacitors, 1 IC and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
ChipFoundry - Firmware and hardware support for chipIgnite projects using Caravel.
ChipFoundry - Firmware and hardware support for chipIgnite projects using Caravel.
This repository provides firmware examples, flash programming tools, and diagnostic utilities for testing chipIgnite projects using the Caravel SoC. It also includes schematics, layout files, and Gerber files for PCB evaluation and breakout boards.
This repository is optimized for chipIgnite shuttle projects. For detailed testing instructions and firmware examples, see the chipIgnite README.
Main components on the Carvel Breakout board as M.2 Card
Carvel Breakout board as M.2 Card bill of materials (BOM)
11 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AZ1117CH-1.8TRG1 Caravel | QFN-64-1EP_9x9mm_P0.5mm_EP7.65x7.65mm | U1 |
| 1 | 10118193-0001LF MICROMOD-2222-Generic | MicroMod-M.2-CARD-E-22 | J1 |
| 4 | GMC31X5R107M6R3NT 0.1uf | C_0402_1005Metric | C1, C2, C3, C4 |
| 3 | CC0805KKX5R8BB106 0.1uf | C_0402_1005Metric | C5, C6, C9 |
| 2 | CC0805MKX5R5BB226 0.1uf | C_0402_1005Metric | C7, C8 |
Carvel Breakout board as M.2 Card design files
The KiCad project lives in the chipfoundry/caravel_board repository on GitHub; these links point at the commit this page was built from.
Carvel Breakout board as M.2 Card: common questions
How big is the Carvel Breakout board as M.2 Card?
The Carvel Breakout board as M.2 Card measures 22 × 22 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the Carvel Breakout board as M.2 Card?
11 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Carvel Breakout board as M.2 Card design files?
From the chipfoundry/caravel_board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Carvel Breakout board as M.2 Card design in my own project?
The repository has no license, so all rights stay with chipfoundry. Use it as a reference, and ask the author before reusing the design.
More boards in caravel_board
Caravel-Nucleo v2-M.2
73.4 × 92.5 mm90 parts2LNo license1
Caravel Nucleo
68.1 × 92.5 mm89 parts2LNo license1
Clear Chip Development Board
76.2 × 73.8 mm84 parts2LNo license1
Clear Chip Development Board
76.2 × 73.8 mm84 parts2LNo license1
5V Development Board
76.2 × 73.8 mm83 parts4LNo license1
Caravel
54.5 × 52.1 mm72 parts2LNo license1
Caravel 3.3V Development Board
76.2 × 73.8 mm68 parts2LNo license1
Caravel 3.3V Development Board
76.2 × 73.8 mm68 parts2LNo license1
Led bar
23.9 × 29.4 mm12 parts2LNo license1
Carvel Breakout board as M.2 Card
22 × 22 mm11 parts4LNo license1
Carvel Breakout board as M.2 Card
22 × 22 mm9 parts4LNo license1
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979