HardLabs

Led bar

chipfoundry·caravel_board·hardware/other/led-bar-pcb/led-bar-pcb.kicad_pcb

Led bar PCB layout, top view — open source board by chipfoundry
Simulate this board

About the Led bar PCB

Led bar is an open source PCB design by chipfoundry, published on GitHub. It is a 2-layer board measuring 23.9 × 29.4 mm, with 12 components from 7 distinct parts.

By type, the board carries 10 resistors and 1 connector.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

ChipFoundry - Firmware and hardware support for chipIgnite projects using Caravel.

ChipFoundry - Firmware and hardware support for chipIgnite projects using Caravel.

This repository provides firmware examples, flash programming tools, and diagnostic utilities for testing chipIgnite projects using the Caravel SoC. It also includes schematics, layout files, and Gerber files for PCB evaluation and breakout boards.

This repository is optimized for chipIgnite shuttle projects. For detailed testing instructions and firmware examples, see the chipIgnite README.

Led bar, from the project README
From the project README

Led bar bill of materials (BOM)

12 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
10118193-0001LF
Conn_01x11_Socket
J1
1
HDSP-4830_2
BAR1
5
RC0805FR-0710KL
51
R1, R2, R5, R6, R8
1
RMCF0805FT82R0
51
R3
1
RMCF0805FT2K00
51
R4
1
RMCF0805FT12K0
51
R7
2
RNCP0805FTD150R
51
R9, R10

Led bar design files

The KiCad project lives in the chipfoundry/caravel_board repository on GitHub; these links point at the commit this page was built from.

Led bar: common questions

How big is the Led bar PCB?

The Led bar measures 23.9 × 29.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Led bar?

12 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Led bar design files?

From the chipfoundry/caravel_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Led bar design in my own project?

The repository has no license, so all rights stay with chipfoundry. Use it as a reference, and ask the author before reusing the design.

More boards in caravel_board

Similar boards