HardLabs

MostekDumper

chregu82·RevoxB780·FirmwareDumper/PCB/MostekDumper.kicad_pcb

MostekDumper PCB layout, top view — open source AVR/Arduino board by chregu82

About the MostekDumper PCB

MostekDumper is an open source AVR/Arduino PCB design by chregu82, published on GitHub. It is a 2-layer board measuring 100 × 57 mm, with 21 components from 12 distinct parts.

Its main chip is the Arduino_Mega2560_Shield, from the AVR/Arduino family. Other key parts include the 4066, TBA1-0519, LM317 and MK3875. By type, the board carries 12 resistors, 5 ICs, 2 capacitors and 1 transistor.

Main components on the MostekDumper

4066TBA1-0519LM317MK3875

MostekDumper bill of materials (BOM)

21 components, 12 distinct parts.

QtyPartRefs
1
4066
U1
1
TBA1-0519
U2
2
LM317
U3, U4
1
MK3875
U5
1
IRF9620
Q1
1
Arduino_Mega2560_Shield
XA1
1
10n
C1
1
100n
C2
2
220
R1, R2
1
1K
R3
1
390
R4
8
680
R5, R6, R7, R8, R9, R10, R11, R12

MostekDumper design files

The KiCad project lives in the chregu82/RevoxB780 repository on GitHub; these links point at the commit this page was built from.

MostekDumper: common questions

What microcontroller does the MostekDumper use?

The MostekDumper is built around the Arduino_Mega2560_Shield, from the AVR/Arduino family.

How big is the MostekDumper PCB?

The MostekDumper measures 100 × 57 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MostekDumper?

21 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the MostekDumper design files?

From the chregu82/RevoxB780 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MostekDumper design in my own project?

The repository has no license, so all rights stay with chregu82. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MostekDumper without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in RevoxB780

Similar boards