38 open source boards using the 4066

Real designs built with the 4066, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

38 boardsClear filters|Most starred

How designs wire the 4066

Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the 4066 connects to, and the resistors, capacitors and other passives placed on it.

  • The O/I pins have a series resistor on 13 of 27 designs, most often 4.7 kΩ (then 10 kΩ).
  • The I/O pins have a series resistor on 12 of 27 designs, most often 220 Ω (then 49.9 kΩ).
I/Opin 1, 4, 8, 11Connected to: A connector 24%
  • Series resistor on 44% · 220 Ω (8), 49.9 kΩ (8), 4.7 kΩ (3)
O/Ipin 2, 3, 9, 10Connected to: Signal 87%
  • Series resistor on 48% · 4.7 kΩ (17), 10 kΩ (7), 5.6 kΩ (4)
VSSpin 7Connected to: GND 74%
VDDpin 14Connected to: 5V 96%
  • Decoupling capacitor on 37% · 100 nF (12)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SCOPETREX by schlae, C64-250407-Replica-KiCad by bwack, Gameport by tebl and C128-mmu-256k exp by ytmytm.

The 4066 in open source designs

The gallery holds 38 open source boards using the 4066 from 29 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 106 components.

82% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is SCOPETREX by schlae.

Microcontrollers on boards using the 4066

4066: common questions

Where can I find a 4066 reference design?

Each of the 38 boards on this page is a real design using the 4066. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 4066 O/I pin?

The O/I pins have a series resistor on 13 of 27 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 27 open source designs using the 4066.

What resistor goes on the 4066 I/O pin?

The I/O pins have a series resistor on 12 of 27 designs, most often 220 Ω (then 49.9 kΩ). Counted from the KiCad layouts of 27 open source designs using the 4066.

What parts are used alongside the 4066?

The 74LS00, 74LS32, AY3-8912, CD4052B and LF347 appear in the most repositories here.

Which microcontrollers do boards using the 4066 use?

Most are built on PIC (3), RP2040/RP2350 (3), STM32 (3) and AVR/Arduino (2).

How big is a typical board using the 4066?

The median is 100 × 100 mm, and 82% are two-layer designs.

What is the most popular open source board using the 4066?

By GitHub stars, SCOPETREX by schlae, with 245 stars.

Can I simulate one of these boards using the 4066 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part