Protoboard
Chrismettal·flipper-zero-backpacks·pcb/Protoboard/Protoboard.kicad_pcb
About the Protoboard PCB
Protoboard is an open source PCB design by Chrismettal, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 66.4 × 48.1 mm, with 20 components from 18 distinct parts.
It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.
From the project
Backpack-style addon boards for the Flipper Zero!
This is a collection of addon boards for the Flipper Zero multi-tool in the style of a backpack that clips behind the Flipper!
Right now it features only an ESP32 wifi board, like the official wifi devboard, only formatted as a backpack and with an SD card slot fitted. There is also a protoboard to create your own designs in the same formfactor.
The backpack framework is designed to fit snugly to a Flipper inside its silicone case. Without a silicone sleeve, the board will have 2mm of space around the Flipper, which might be undesireable.

Protoboard bill of materials (BOM)
20 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | +5V | Board-Board-1mmEdge-2,54mm | J1 |
| 1 | PA7 | Board-Board-1mmEdge-2,54mm | J2 |
| 1 | PA6 | Board-Board-1mmEdge-2,54mm | J3 |
| 1 | PA4 | Board-Board-1mmEdge-2,54mm | J4 |
| 1 | PB3 | Board-Board-1mmEdge-2,54mm | J5 |
| 1 | PB2 | Board-Board-1mmEdge-2,54mm | J6 |
| 1 | PC3 | Board-Board-1mmEdge-2,54mm | J7 |
| 3 | GND | Board-Board-1mmEdge-2,54mm | J8, J11, J18 |
| 1 | 3V3 | Board-Board-1mmEdge-2,54mm | J9 |
| 1 | SWCLK | Board-Board-1mmEdge-2,54mm | J10 |
| 1 | SWDIO | Board-Board-1mmEdge-2,54mm | J12 |
| 1 | UART_TX | Board-Board-1mmEdge-2,54mm | J13 |
| 1 | UART_RX | Board-Board-1mmEdge-2,54mm | J14 |
| 1 | PC1 | Board-Board-1mmEdge-2,54mm | J15 |
| 1 | PC0 | Board-Board-1mmEdge-2,54mm | J16 |
| 1 | PB14 | Board-Board-1mmEdge-2,54mm | J17 |
| 1 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J20 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J21 |
Protoboard design files
The KiCad project lives in the Chrismettal/flipper-zero-backpacks repository on GitHub; these links point at the commit this page was built from.
Protoboard: common questions
How big is the Protoboard PCB?
The Protoboard measures 66.4 × 48.1 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Protoboard?
20 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Protoboard design files?
From the Chrismettal/flipper-zero-backpacks repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Protoboard design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Chrismettal chose for the repository.
More boards in flipper-zero-backpacks
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k