Pulse shaping extension v1.1
About the Pulse shaping extension v1.1 PCB
Pulse shaping extension v1.1 is an open source PCB design by christiangroothuis, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 75 × 40 mm, with 70 components from 30 distinct parts.
Other key parts include the AD9102BCPZRL7, ADA4817-1ACPZ-R7, THS3091DDAR and MAX1853EXT+T. By type, the board carries 31 capacitors, 23 resistors, 7 connectors, 4 ICs, 3 diodes and 1 crystal.
From the project
Adaptation of https://github.com/MKesenheimer/fault-injection-library
Findus (aka the fault-injection-library) is a toolchain to perform fault-injection attacks on microcontrollers and other targets. This library offers an easy entry point to carry out fault-injection attacks against microcontrollers, SoCs and CPUs. With the provided and easy to use functions and classes, fault-injection projects can be realized quickly with cheap and available hardware.
Main components on the Pulse shaping extension v1.1
Pulse shaping extension v1.1 bill of materials (BOM)
70 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD9102BCPZRL7 | CP-32-12_ADI | U1 |
| 1 | ADA4817-1ACPZ-R7 ADA4817-1ACP | LFCSP-8-1EP_3x3mm_P0.5mm_EP1.45x1.74mm | U3 |
| 1 | THS3091DDAR | VREG_LM5017MR_NOPB | U4 |
| 1 | MAX1853EXT+T ~ | SOT-363_SC-70-6 | U5 |
| 1 | CO32D6-125.000-33GDTSTL OB3225125MLDB6SI-00 | Oscillator_SMD_SiTime_PQFD-6L_3.2x2.5mm | X1 |
| 1 | Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J1 |
| 3 | Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J2, J3, J7 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4, J5 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | 1k | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | LED_RED_3.3V | LED_0603_1608Metric | D1 |
| 1 | LED_GREEN_RESET | LED_0603_1608Metric | D2 |
| 1 | LED_BLUE_TRIG | LED_0603_1608Metric | D3 |
| 16 | 100NF 0.1uF | C_0603_1608Metric | C1, C2, C3, C4, C6, C8, C9, C11 +8 |
| 9 | 100PF 100pF | C_0603_1608Metric | C5, C7, C10, C12, C14, C16, C18, C22 +1 |
| 2 | 1UF 1uF | C_0805_2012Metric | C19, C20 |
| 2 | 1.5pF | C_0603_1608Metric | C25, C26 |
| 2 | 2.2UF 2.2uF | C_0805_2012Metric | C28, C31 |
| 3 | 4.7k | R_0603_1608Metric | R1, R2, R3 |
| 1 | 100 | R_0603_1608Metric | R4 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 6.8k | R_0603_1608Metric | R5, R7 |
| 1 | 1k | R_0603_1608Metric | R6 |
| 3 | 150 | R_0603_1608Metric | R8, R9, R10 |
| 1 | 560 | R_0603_1608Metric | R11 |
| 1 | 120 | R_0603_1608Metric | R12 |
| 5 | 10K | R_0603_1608Metric | R13, R14, R15, R16, R17 |
| 2 | 49.9 | R_0603_1608Metric | R18, R21 |
| 2 | 500 | R_0603_1608Metric | R19, R22 |
| 1 | 10 | R_2512_6332Metric | R20 |
| 1 | 1 | R_2512_6332Metric | R23 |
Pulse shaping extension v1.1 design files
The KiCad project lives in the christiangroothuis/fault-injection-library repository on GitHub; these links point at the commit this page was built from.
Pulse shaping extension v1.1: common questions
How big is the Pulse shaping extension v1.1 PCB?
The Pulse shaping extension v1.1 measures 75 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pulse shaping extension v1.1?
70 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pulse shaping extension v1.1 design files?
From the christiangroothuis/fault-injection-library repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pulse shaping extension v1.1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which christiangroothuis chose for the repository.
