Stm32f205-breakout board
christiangroothuis·fault-injection-library·schematics/kicad/stm32f205-breakout-board/stm32f205-breakout-board.kicad_pcb
About the Stm32f205-breakout board
Stm32f205-breakout board is an open source STM32 PCB design by christiangroothuis, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 37 × 33.5 mm, with 3 components from 2 distinct parts.
Its main chip is the AD9102BCPZRL7, from the STM32 family. By type, the board carries 2 connectors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Adaptation of https://github.com/MKesenheimer/fault-injection-library
Findus (aka the fault-injection-library) is a toolchain to perform fault-injection attacks on microcontrollers and other targets. This library offers an easy entry point to carry out fault-injection attacks against microcontrollers, SoCs and CPUs. With the provided and easy to use functions and classes, fault-injection projects can be realized quickly with cheap and available hardware.
Main components on the Stm32f205-breakout board
Stm32f205-breakout board bill of materials (BOM)
3 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD9102BCPZRL7 STM32F205RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 2 | Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
Stm32f205-breakout board design files
The KiCad project lives in the christiangroothuis/fault-injection-library repository on GitHub; these links point at the commit this page was built from.
Stm32f205-breakout board: common questions
What microcontroller does the Stm32f205-breakout board use?
The Stm32f205-breakout board is built around the AD9102BCPZRL7, from the STM32 family.
How big is the Stm32f205-breakout board?
The Stm32f205-breakout board measures 37 × 33.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32f205-breakout board?
3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32f205-breakout board design files?
From the christiangroothuis/fault-injection-library repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm32f205-breakout board design in my own project?
Yes, under the terms of its GPL-3.0 license, which christiangroothuis chose for the repository.
Can I test firmware for the Stm32f205-breakout board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in fault-injection-library
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k