HardLabs

Lpc1311-target v1

christiangroothuis·fault-injection-library·schematics/kicad/lpc1311-target-v1/lpc1311-target-v1.kicad_pcb

Lpc1311-target v1 PCB layout, top view — open source NXP board by christiangroothuis

About the Lpc1311-target v1 PCB

Lpc1311-target v1 is an open source NXP PCB design by christiangroothuis, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 57 × 25.5 mm, with 36 components from 27 distinct parts.

Its main chip is the ADA4817-1ACPZ-R7, from the NXP family. Other key parts include the AD9102BCPZRL7 and CH340X. By type, the board carries 12 resistors, 10 connectors, 5 diodes, 5 capacitors, 3 ICs and 1 switch.

From the project

Adaptation of https://github.com/MKesenheimer/fault-injection-library

Findus (aka the fault-injection-library) is a toolchain to perform fault-injection attacks on microcontrollers and other targets. This library offers an easy entry point to carry out fault-injection attacks against microcontrollers, SoCs and CPUs. With the provided and easy to use functions and classes, fault-injection projects can be realized quickly with cheap and available hardware.

Lpc1311-target v1, from the project README
From the project README

Main components on the Lpc1311-target v1

AD9102BCPZRL7CH340XADA4817-1ACPZ-R7

Lpc1311-target v1 bill of materials (BOM)

36 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AD9102BCPZRL7
AMS1117-3.3
U1
1
CH340X
U2
1
ADA4817-1ACPZ-R7
LPC1311FHN33-101
U3
1
ISP_MODE
J1
1
UART_ISP
J2
1
JMP_3V3
J3
1
UART
J4
1
SWD
J5
1
GPIO
J6
1
USB_C_Receptacle_USB2.0_16P
J7
1
Conn_Coaxial
J8
1
GLITCH_IN
J9
1
RESET
J10
1
KMR221GLFS
S1
1
LED_RED_3.3V
D1
1
LED_GREEN_GPIO
D2
1
LED_BLUE_GPIO
D3
1
LED_RED_TX
D4
1
LED_BLUE_RX
D5
2
100NF
10u
C1, C2
Show 7 more
QtyPartRefs
1
100NF
0.1uF
C3
1
100NF
10nF
C4
1
100PF
10nF
C5
2
5.1k
R1, R2
5
150
R3, R4, R5, R6, R7
3
4.7k
R8, R9, R10
2
100
R11, R12

Lpc1311-target v1 design files

The KiCad project lives in the christiangroothuis/fault-injection-library repository on GitHub; these links point at the commit this page was built from.

Lpc1311-target v1: common questions

What microcontroller does the Lpc1311-target v1 use?

The Lpc1311-target v1 is built around the ADA4817-1ACPZ-R7, from the NXP family.

How big is the Lpc1311-target v1 PCB?

The Lpc1311-target v1 measures 57 × 25.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Lpc1311-target v1?

36 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Lpc1311-target v1 design files?

From the christiangroothuis/fault-injection-library repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Lpc1311-target v1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which christiangroothuis chose for the repository.

Can I test firmware for the Lpc1311-target v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in fault-injection-library

Similar boards