12v lighting
About the 12v lighting PCB
12v lighting is an open source PCB design by chrskly, published on GitHub. It is a 2-layer board measuring 241 × 88 mm, with 34 components from 5 distinct parts.
By type, the board carries 12 connectors and 8 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Wiring diagrams and PCBs for my Mustang EV conversion project
This repo contains the circuits, software, and wiring diagrams for my project to convert a 1965 Ford Mustang to a EV.
Schematic, PCB, and software for the battery management system.
Schematic and PCB for wiring that sits in the front of the car (engine bay).
Ignition switch Drive inhibition (preventing driving off when charging) Coolant pump Inverter Contactors Shunt
12v lighting bill of materials (BOM)
34 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 76825-0002 | 768250002 | J1, J2, J5, J10, J12 |
| 7 | 76825-0004 | 768250004 | J3, J4, J6, J7, J8, J9, J11 |
| 6 | 178.6165.0001 | 17861650001 | BRAKE_LIGHT_FUSE_1, CABIN_LIGHTS_FUSE1, FLASHER_FUSE1, HEADLIGHT_FUSE1, LIGHTING_MASTER_FUSE1, REVERSE_LIGHTS_FUSE1 |
| 8 | DZ85AB-5-PCB | DZ85AB5PCB | BRAKE_LIGHT_RELAY1, CABIN_LIGHTS_RELAY1, HEADLIGHT_RELAY1, HIGHBEAM_RELAY1, LH_INDICATOR_RELAY1, LIGHTING_IGNITION_RELAY1, REVERSE_LIGHT_RELAY1, RH_INDICATOR_RELAY1 |
| 8 | 10A10 | D_DO-201AD_P15.24mm_Horizontal | D1, D2, D9, D10, D11, D12, D13, D14 |
12v lighting design files
The KiCad project lives in the chrskly/electric-mustang-wiring repository on GitHub; these links point at the commit this page was built from.
12v lighting: common questions
How big is the 12v lighting PCB?
The 12v lighting measures 241 × 88 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 12v lighting?
34 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 12v lighting design files?
From the chrskly/electric-mustang-wiring repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 12v lighting design in my own project?
The repository has no license, so all rights stay with chrskly. Use it as a reference, and ask the author before reusing the design.
More boards in electric-mustang-wiring
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k