BluePillAcond
About the BluePillAcond PCB
BluePillAcond is an open source PCB design by ciiiutnfrc, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 86.4 × 103.5 mm, with 31 components from 14 distinct parts.
By type, the board carries 14 resistors, 4 transistors, 3 switches, 3 diodes and 3 capacitors.
It belongs with the robotics & motion designs in this gallery.
From the project
Versión educativa del robot móvil RoMAA (EduRoMAA)
El robot móvil EduRoMAA fue desarrollado con fines didácticos para la enseñanza de programación de sistemas embebidos utilizando la EduCIAA (versión educativa de la Computadora Industrial Abierta Argentina) en el Centro de Investigación en Informática para la Ingeniería de la Universidad Tecnológica Nacional, Facultad Regional Córdoba, bajo el proyecto Robot móvil de hardware y software abierto con fines educativos en ingeniería electrónica.
BluePillAcond bill of materials (BOM)
31 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | BC548 | TO-92_Rugged | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x02 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | Alim_5V1 |
| 1 | Conn_02x20_Counter_Clockwise | DIP-40_W15.24mm_LongPads | BluePill1 |
| 1 | Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | Header1 |
| 1 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | Header2 |
| 3 | SW_Push | SW_PUSH_6mm_H4.3mm | SW1, SW2, SW3 |
| 1 | LED_RGBA | LED_D5.0mm-4_RGB | D1 |
| 1 | LED Rojo | LED_D5.0mm | D2 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 3 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5 |
| 3 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6 |
| 4 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9, R10 |
| 4 | 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R12, R13, R14 |
BluePillAcond design files
The KiCad project lives in the ciiiutnfrc/eduromaa repository on GitHub; these links point at the commit this page was built from.
BluePillAcond: common questions
How big is the BluePillAcond PCB?
The BluePillAcond measures 86.4 × 103.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BluePillAcond?
31 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the BluePillAcond design files?
From the ciiiutnfrc/eduromaa repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the BluePillAcond design in my own project?
Yes, under the terms of its GPL-3.0 license, which ciiiutnfrc chose for the repository.
More boards in eduromaa
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979
11ua
57.3 × 19 mm26 parts2LGPL-3.0979
Diff driver
32 × 22 mm14 parts2LGPL-3.0979