TLV320ADC-breakout

Circuit-Stitch·TLV320ADC-breakout

TLV320ADC-breakout layout, top view — open source board by Circuit-Stitch

About the TLV320ADC-breakout

TLV320ADC-breakout is an open source PCB design by Circuit-Stitch, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 37.2 × 33.7 mm, with 40 components from 21 distinct parts.

Other key parts include the TLV320ADC6140IRTWR and TPS7A2033PDBVR. By type, the board carries 21 capacitors, 7 resistors, 6 connectors, 2 ICs, 2 jumpers and 1 crystal.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A four-channel, line-level ADC board built around the TI TLV320ADC6140. It is a KiCad 10 project.

A four-channel, line-level ADC board built around the TI TLV320ADC6140. It is a KiCad 10 project.

The board sends TDM audio out and is controlled over I2C. It connects to a Raspberry Pi Pico 2 by jumper wires. It was built as the real ADC for the RP2350 capture tests in portacorder, a portable 32-bit float recorder.

The parts and reference designators match docs/bom.md.

TLV320ADC-breakout, from the project README
From the project README

Main components on the TLV320ADC-breakout

TLV320ADC6140IRTWRTPS7A2033PDBVR

TLV320ADC-breakout bill of materials (BOM)

40 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TLV320ADC6140IRTWR
U1
1
TPS7A2033PDBVR
U2
1
Abracon ASTX-H11-24.576MHZ-T
ASTX-H11-24.576MHZ-T
Y1
1
Pico_Power_Control
J1
1
Pico_Audio_Bus
J2
1
CH1_IN
J3
1
CH2_IN
J4
1
CH3_IN
J5
1
CH4_IN
J6
1
ADDR0
JP1
1
ADDR1
JP2
1
Murata BLM18PG221SN1D
220R@100MHz
FB1
4
Kyocera AVX 06033C105KAT4A
1u 25V
C1, C2, C11, C13
4
Murata GRM155R71C104KA88D
100n
C3, C5, C7, C9
4
Murata GRT188R61A106KE13D
10u
C4, C6, C8, C10
1
Murata GRM155R71C103KA01D
10n
C12
8
Kyocera AVX 0805ZC475KAT2A
4.7u 10V
C14, C15, C16, C17, C18, C19, C20, C21
1
Yageo RC0402FR-0710KL
10k
R1
1
Yageo RC0402FR-0722RL
22
R2
3
Yageo RC0402FR-0733RL
33
R3, R4, R5
Show 1 more
QtyPartRefs
2
Yageo RC0402FR-074K7L
4.7k
R6, R7

TLV320ADC-breakout design files

The KiCad project lives in the Circuit-Stitch/TLV320ADC-breakout repository on GitHub; these links point at the commit this page was built from.

TLV320ADC-breakout: common questions

How big is the TLV320ADC-breakout?

The TLV320ADC-breakout measures 37.2 × 33.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TLV320ADC-breakout?

40 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TLV320ADC-breakout design files?

From the Circuit-Stitch/TLV320ADC-breakout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TLV320ADC-breakout design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which Circuit-Stitch chose for the repository.

Similar boards