Esp32 sensor

cjinn·esp32_sensor·kicad/esp32_sensor.kicad_pcb

Esp32 sensor PCB layout, top view — open source ESP32 board by cjinn

About the Esp32 sensor PCB

Esp32 sensor is an open source ESP32 PCB design by cjinn, published on GitHub. It is a 2-layer board measuring 58.6 × 61.2 mm, with 47 components from 28 distinct parts.

Its main chip is the ESP32-WROOM-32D, from the ESP32 family.

It belongs with the sensors and iot & wireless designs in this gallery.

From the project

ESP32-powered module that reads one or more sensors, and shares it with other ESP32-powered modules on a network

The goal is to have multiple of these ESP32 sensor modules interact with each other using mesh Wi-Fi to share information with each other.

X.Y.ZA - X: Major version number of the design. It is assumed there are major changes to the overall design including PCB, components, fucntionality, purpose, etc. - Y: Minor version number of the design. Any increment on this signifies a minor design revision. Most likely an electrical characteristic change and/or component replacement. - Z: Revision version number of the design. Any increment on this signifies a commit has been made to the design. Most…

Esp32 sensor bill of materials (BOM)

47 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
100uF
CP_ESP_1
2
0.1uF
C_ESP_1, C_PW_4
3
100nF
C_IMU_1, C_IMU_2, C_IMU_3
2
1uF
C_PW_1, C_PW_3
2
4.7uF
C_PW_2, C_PW_5
3
BAT20JFILM
D_PW_1, D_PW_2, D_PW_3
2
4157
J_1, J_2
1
SPI
J_3
1
IMU_INT2
J_4
1
IMU_INT1
J_5
1
IMU_SCL
J_6
1
IMU_SDA
J_7
2
Header_Pin_4
J_CN_1, J_CN_2
3
Header_Pin_1
J_CN_3, J_CN_4, J_PW_3
2
Header_Pin_2
J_PW_1, J_PW_2
1
4.7uH
L_PW_1
1
IRLML5103TRPBF
Q_PW_1
3
500
R_ESP_1, R_ESP_3, R_ESP_5
3
10k
R_ESP_2, R_ESP_4, R_PW_1
2
4.7k
R_IMU_1, R_IMU_2
Show 8 more
QtyPartRefs
2
100k
R_PW_2, R_PW_3
1
115k
R_PW_4
2
PTS647SK38SMTR2LFS
SW_ESP_1, SW_ESP_2
1
USB4110-GF-A
U_CN_1
1
ESP32-WROOM-32D
U_ESP_1
1
LSM6DSMTR
U_IMU_1
1
MAX25276ATCA_VY+
U_PW_1
1
LED
LED_ESP_1

Esp32 sensor design files

The KiCad project lives in the cjinn/esp32_sensor repository on GitHub; these links point at the commit this page was built from.

Esp32 sensor: common questions

What microcontroller does the Esp32 sensor use?

The Esp32 sensor is built around the ESP32-WROOM-32D, from the ESP32 family.

How big is the Esp32 sensor PCB?

The Esp32 sensor measures 58.6 × 61.2 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Esp32 sensor?

47 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32 sensor design files?

From the cjinn/esp32_sensor repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Esp32 sensor design in my own project?

The repository has no license, so all rights stay with cjinn. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32 sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards