Multichannel mixer
claynicholson·copper-kicad-mcp·bench/route/corpus/multichannel_mixer/multichannel_mixer.kicad_pcb
About the Multichannel mixer PCB
Multichannel mixer is an open source PCB design by claynicholson, published on GitHub under the MIT license. It is a 2-layer board measuring 110 × 111 mm, with 114 components from 10 distinct parts.
Other key parts include the TL072CD. By type, the board carries 47 resistors, 40 capacitors, 6 connectors and 5 ICs.
From the project
MCP server that lets any AI app design real, orderable KiCad boards: schematic, LCSC parts, PCB routing, ERC/DRC, JLCPCB fab files.
Objective scoring of a PCB autorouter on real, human-routed KiCad boards (plus two synthetic stress cases). KiCad itself is the judge: completion and DRC come from kicad-cli pcb drc on the routed board, length / vias / widths from pcbnew. Nothing a router reports about itself is trusted for the score.
Boards can be run in parallel in separate processes (one --board each); every process rewrites the summary from the per-board files, so finish with --summarize.
Main components on the Multichannel mixer
Multichannel mixer bill of materials (BOM)
114 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | TL072CD TEXAS INSTRUMENTS | SOIC127P600X175-8N | IC1, IC2, IC3, IC4, IC5 |
| 5 | CH1 | Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal | J1, J6, J7, J8, J9 |
| 1 | CLIFF_FC68148(DC-10A) Power CLIFF ELECTRONIC COMPONENTS | CLIFF_FC68148(DC-10A) | J5 |
| 4 | Mid | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV5, RV9, RV13 |
| 4 | Bass | Potentiometer_Alps_RK09K_Single_Vertical | RV2, RV6, RV10, RV14 |
| 4 | Treble | Potentiometer_Alps_RK09K_Single_Vertical | RV3, RV7, RV11, RV15 |
| 4 | Volume | Potentiometer_Alps_RK09K_Single_Vertical | RV4, RV8, RV12, RV16 |
| 11 | CTEB_2.2UF_35V_10%_254-500X840 KEMET | CAPPRB254-500X840 | C1, C2, C4, C5, C13, C14, C22, C23 +3 |
| 29 | CC1206_100NF_50V_10%_X7R GENERIC | CAPC3216X140N | C3, C6, C7, C8, C9, C10, C11, C12 +21 |
| 47 | R1206_10K_1%_0.25W_100PPM GENERIC | RESC3216X65N | R1, R2, R3, R4, R5, R6, R7, R8 +39 |
Multichannel mixer design files
The KiCad project lives in the claynicholson/copper-kicad-mcp repository on GitHub; these links point at the commit this page was built from.
Multichannel mixer: common questions
How big is the Multichannel mixer PCB?
The Multichannel mixer measures 110 × 111 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Multichannel mixer?
114 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Multichannel mixer design files?
From the claynicholson/copper-kicad-mcp repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Multichannel mixer design in my own project?
Yes, under the terms of its MIT license, which claynicholson chose for the repository.
More boards in copper-kicad-mcp
ESP32
One air max
claynicholson
99.5 × 72 mm197 parts4LMIT102Coldfire
claynicholson
157.5 × 91.4 mm157 parts4LMIT102RP2040/RP2350
TinyTapeout 4+ Demoboard
claynicholson
104.5 × 81 mm131 parts4LMIT102Stickhub
claynicholson
16.5 × 40 mm89 parts2LMIT102Raspberry Pi
CM5 MINIMA
claynicholson
61.2 × 64.2 mm70 parts6LMIT102Actionneur piezo
claynicholson
100.7 × 80 mm68 parts2LMIT102SERIAL PIC PROGRAMMER
claynicholson
160 × 99.1 mm55 parts2LMIT102STM32
USB-C phone breathalyzer
claynicholson
22 × 48 mm26 parts2LMIT102Sonde xilinx
claynicholson
80.4 × 43.2 mm25 parts2LMIT102Interf u
claynicholson
115.6 × 108.2 mm23 parts2LMIT102Ecc83
claynicholson
52.1 × 46.4 mm11 parts2LMIT102