CM5 MINIMA

claynicholson·copper-kicad-mcp·bench/route/corpus/cm5_minima/cm5_minima.kicad_pcb

CM5 MINIMA PCB layout, top view — open source Raspberry Pi board by claynicholson

About the CM5 MINIMA PCB

CM5 MINIMA is an open source Raspberry Pi PCB design by claynicholson, published on GitHub under the MIT license. It is a 6-layer board measuring 61.2 × 64.2 mm, with 70 components from 37 distinct parts.

Its main chip is the ComputeModule5-CM5, from the Raspberry Pi family. Other key parts include the LIS3DH, TPD4EUSB30, STMPS2151STR, SN74LVC1G14DBVR and AP22653W6. By type, the board carries 19 capacitors, 19 resistors, 9 connectors, 9 diodes, 8 ICs and 2 switches.

From the project

MCP server that lets any AI app design real, orderable KiCad boards: schematic, LCSC parts, PCB routing, ERC/DRC, JLCPCB fab files.

Objective scoring of a PCB autorouter on real, human-routed KiCad boards (plus two synthetic stress cases). KiCad itself is the judge: completion and DRC come from kicad-cli pcb drc on the routed board, length / vias / widths from pcbnew. Nothing a router reports about itself is trusted for the score.

Boards can be run in parallel in separate processes (one --board each); every process rewrites the summary from the per-board files, so finish with --summarize.

Main components on the CM5 MINIMA

CM5 MINIMA bill of materials (BOM)

70 components, 37 distinct parts.

QtyPartRefs
1
LIS3DH
U1
2
TPD4EUSB30
U401, U402
1
STMPS2151STR
U405
1
SN74LVC1G14DBVR
U602
1
AP22653W6
U701
1
AP3441SHE-7B
U702
1
ASEK-32.768KHZ-L-R-T
U703
1
SM02B-SRSS-TB (LF)(SN)
CN1
1
GLPLX-SMT-188S7-QQ-Y/G
GLPLX-SMT-188S7
J1
1
TYPEC-305-ACP16H458
J101
1
GT-HD001B-CNNG1
J501
1
I2C
J502
1
SPI
J503
1
JST_SHBM04B-SRSS-TB
J601
1
Bus_M.2_Socket_M
J701
1
Conn_01x22_Female
J802
1
ComputeModule5-CM5
Module301
1
ComputeModule5-CM5
Module302
1
MK-11C04-G013
SW101
1
TS-1010A-B
SW501
Show 17 more
QtyPartRefs
1
TYPEC-305-ACP16H458
USB701
3
RCLAMP0502BA
D101, D502, D701
3
PUSB3F96X
D401, D402, D403
3
GREEN
D605, D606, D702
1
2.2uH
L701
8
100n
C101, C102, C401, C501, C502, C503, C706, C712
1
4u7
C601
8
10u
C701, C703, C704, C705, C708, C709, C710, C711
1
100uF
C702
1
4.7nF
C707
7
2k2
R101, R501, R502, R605, R606, R706, R707
2
0R
R102, R403
4
10k
R104, R107, R108, R705
2
470R
R401, R402
1
15k
R701
2
22k
R702, R703
1
100k
R704

CM5 MINIMA design files

The KiCad project lives in the claynicholson/copper-kicad-mcp repository on GitHub; these links point at the commit this page was built from.

CM5 MINIMA: common questions

What microcontroller does the CM5 MINIMA use?

The CM5 MINIMA is built around the ComputeModule5-CM5, from the Raspberry Pi family.

How big is the CM5 MINIMA PCB?

The CM5 MINIMA measures 61.2 × 64.2 mm, has 6 copper layers and is 1.5296 mm thick.

How many components are on the CM5 MINIMA?

70 components, from 37 distinct parts. The full bill of materials is listed on this page.

Where can I download the CM5 MINIMA design files?

From the claynicholson/copper-kicad-mcp repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the CM5 MINIMA design in my own project?

Yes, under the terms of its MIT license, which claynicholson chose for the repository.

Can I test firmware for the CM5 MINIMA without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in copper-kicad-mcp

Similar boards